shiroku.net
Print Polycarbonate filament on LULZBOT TAZ6 | shiroku.Net
Polycarbonate printing is really difficult. I failed printing many times. This post is a succeed way I did. Environment LULZBOT TAZ6 Polymaker PC-Max 2.85mm True Black Cura LulzBot Edition 3.2.23 Setting Print Temperature: 255°C Build Plate Temperature: 100°C Build Plate Adhesion Type: Brim Key Technic After print brim layer, put temperature-resistant tape on the outskirt of the object. Result Reference How to Succeed when Printing with Polycarbonate Filament | MatterHackers