shiroku.net
Boot HDMI Project on Zybo Z7-10 from SD Card | shiroku.Net
Environment Ubuntu 16.04 ZYBO Z7 10 Vivado 2017.4 Setup According to reference website, prepared a SD card with a boot image. Connect $ sudo apt-get install cu $ ls /dev/ttyUSB* /dev/ttyUSB0 /dev/ttyUSB1 $ sudo chmod 666 /dev/ttyUSB1 $ cu -s 115200 -l /dev/ttyUSB1 Connected. Type any key. Now you can see description. Invalid Selection ************************************************** * ZYBO Video Demo * ************************************************** *Display Resolution: 640x480@60Hz* *Display Pixel Clock Freq. (MHz): 25.000* *Display Frame Index: 0* *Video Capture Resolution: !HDMI UNPLUGGED!* *Video Frame Index: 0* ************************************************** 1 - Change Display Resolution 2 - Change Display Framebuffer Index 3 - Print Blended Test Pattern to Display Framebuffer 4 - Print Color Bar Test Pattern to Display Framebuffer 5 - Start/Stop Video stream into Video Framebuffer 6 - Change Video Framebuffer Index 7 - Grab Video Frame and invert colors 8 - Grab Video