adventuresinacamper.com
Van Conversion: How to Fit Bonded Rear Windows | Adventures in a Camper
After installing our roof vent, the next job was to install the two rear windows! We decided to go for bonded rear windows as we don’t really need to open them since we’re having openable side windows, and if we need any extra ventilation, then we can just open up the back doors instead. Since the side windows aren’t going to be blacked out, we went for the green windows, which is the standard glass colour. The Supplies * Two rear bonded glass windows * U-Profile edge trim in black * TotalSeal 5033 Polyurethane Adhesive * TotalSeal 7016 Cleaner & Activator * TotalSeal 5028 Primer in black * Jigsaw with metal blade * Drill with metal drillbit * Glass suction lifter * Silicone/Caulking gun We started by drilling some pilot holes from inside the van around the area that we needed to cut out. Shane made extra pilot holes around the corners to make it a lot easier to cut around. Once the pilot holes were drilled, he cut around the area with the jigsaw to remove the inner panel. We decided to only do one window at a time, just to make sure it was all working. Once the …