shiroku.net
Simple LED Blink Program on ZYBO Z7 | shiroku.Net
This is my memo about how did I run simple program on Zybo Z7 with this tutorial. Environment Ubuntu 16.04 ZYBO Z7 10 Vivado 2018.2 Create New Project Uncomment .xdc file Zybo-Z7-Master.xdc ##Clock signal set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 } ; #IO_L12P_T1_MRCC_35 Sch=sysclk create_clock -add -name sys_clk_pin -period 8.00 -waveform {0 4} ; ##LEDs set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } ; #IO_L23P_T3_35 Sch=led #set_property -dict { PACKAGE_PIN M15 IOSTANDARD LVCMOS33 } }]; #IO_L23N_T3_35 Sch=led #set_property -dict { PACKAGE_PIN G14 IOSTANDARD LVCMOS33 } }]; #IO_0_35 Sch=led #set_property -dict { PACKAGE_PIN D18 IOSTANDARD LVCMOS33 } }]; #IO_L3N_T0_DQS_AD1N_35 Sch=led Create .v file blimky.v module blimky( input sysclk, output led0 ); reg count = 0; assign led0 = count; always @ (posedge(sysclk)) count