Table Tennis Rules
01. THE TABLE 1.1 The table shall be in surface rectangular, 274 cm. (9 ft.) in length, 152.5 cm. (5 ft.) in width. It shall be supported so that its upper surface, termed the playing surface, shall lie in a horizontal plane 76 cm. (2 ft. 6 in.) above the floor.1.2 It shall be made of any material and shall yield a uniform bounce of about 23 cm. (8 3/4 in.) when a standard ball is dropped from a height of 30 cm. (12 in.) above the surface.1.3 The playing surface shall be dark colored and matt, with a white line 2 cm. (3/4 inch) wide along each edge.1.3.1 The lines along the 152.5 cm. (5 ft.) edges or ends shall be termed end lines, and they shall be regarded as extending indefinitely in both directions.1.3.2 The lines along the 274 cm. (9 ft.) edges or sides shall be termed side lines.1.4 For doubles, the playing surface shall be divided into halves by a white line 3 mm. (1/8 in.) wide, running parallel with the side lines, termed the center line. Permanent marking of the center line shall not invalidate the table for singles play. The center line shall be regarded as part of each right hand court.1.5 The playing surface shall be considered to include the top edges of the table, but not the sides of the table top below the edge. BROWSE THE WORLD'S BEST TABLES 02. THE NET ASSEMBLY 2.1 The playing surface shall be divided into two