shop.eventag.ch
Pro Intercom, Partyline Intercom Beltpack BP2 - eventag Online-Shop
The BP2 or BP2B portable headset station may be worn on the belt or hung on the wall by its sturdy belt-clip. Soft plastic strips on the underside help hold it in place when set on top of a console. The matte black finish mini- mizes visibility. Both are true 2-circuit units, permitting the user to talk and/or listen to either or both circuits simulta- neously. Separate controls are provided for each circuit. The BP2 mixes the incoming audio from both circuits to one earphone.The BP2B supplies separate audio from each circuit to each ear (binaural).The top (or front) panel contains controls for switching each microphone circuit on and off, for controlling each listening level, and for signaling on each circuit. They are easily identifiable by touch. A recessed, screwdriver-adjust control is provided for varying the level of the user’s voice to be heard in his own earphone (sidetone). The bottom (or back) panel provides two 3-pin female XLRs for connection to two circuits, and a male XLR for connection of any standard communi- cations headset with a dynamic microphone. Since each of the two back panel 3-pin female XLRs are dedicated to one of the two circuits, it is not possible to loop-through these stations. To loop onwards requires a y-cable consisting of one 3-pin male XLR and two 3-pin female XLRs. The BP2 has a 4-pin headset connector; the BP2B has a 5-pin. Technical Specifications: (Subject to change without notice) Power requirement: 24 ~ 30VDC, 10 mA quiescent, 30mA max. (with signal lamp lit)Headphone output: 8 ~ 4K‡ acceptable, 200‡ ideal Microphone input: 200 ~ 600‡ DynamicSidetone rejection: >50dBAudio bridging impedance: 200‡ unbalancedSize: 3.70 x 4.30 x 2.50 in. (93.98 x 109.22 x 63.5 mm. Weight: 13.5 oz. (0.383 Kg.)