Log in
Avatar

Welding 247

@thinksquad / thinksquad.tumblr.com

PostsLikesFollowing
thinksquad

Campbell Hausfeld 115V stick welder: Start Welding Now for Around 100 Bucks!

The Campbell Hausfeld welder is great for hobbyists or people that value portability. The welder is extremely portable weighing at only 23 pounds. It also is 115V which means that basically any place you have a standard outlet you can weld.

This welder is currently on sale on Amazon through this link here.

The welder is also great for people just learning how to weld as the skills built learning how to use this welder are easily transferable to heavier duty welders. At around 100 bucks it is also a great way to start welding on your own.

The Campbell Hausfeld 115V stick welder also includes everything you need to get started welding mild steel and stainless steel immediately including welding rods, hammer/brush, and a welding shield.

This welder is suitable for tackling many issues encountered around the house with its ability to weld steel from 18 gauge up to 1/8” thick. The welder is also built with a thermal overload shutoff that prevents damage to your welder if overheated.

Let’s take a look at some of the other features of the welder:

  • Great for small repairs and hobby welding
  • Runs on standard 115V power
  • Dual heat setting
  • Thermal overload protection
  • Welds mild and stainless steel from 18 ga. To 1/8 in.

If you want to know more about this welder, you can see it on Amazon through this link.

The good

  • Comes ready to stick weld, no additional purchases required
  • Great for a beginner welder just starting to learn
  • Very affordable and portable

The bad

  • If you’re primarily looking to weld 1/8” steel or thicker you might want to look at the Lincoln Electric AC225S stick welder here

This welder is great for:

  1. People just starting to weld
  2. People that need a very portable welder
  3. People that need an affordable welder

Take a look at the review below from a current owner:

Jeffery,

This welder is actually comparable to my Lincoln 225 welder no joke. I have welded .25” steel with no issues. Don’t be thrown off by the brand, I have had no issues. This welder is great because it comes with welding rods, mask, hammer/brush and a 5 year warranty to back it up. Also another feature that isn’t mentioned in the ad are two storage compartments, one on top for rods and one behind the door big enough to store my welding helmet. You should buy this welder, you won’t be disappointed.

#welding
thinksquad

Hobart Handler 140 Mig Welder Review

The Hobart Handler 140 is a great multipurpose welder. It utilizes 115-volt current which means that you can basically use it wherever you have a standard outlet.

It also is flexible enough to use on light duty projects using steel as light as 24 gauge and has enough power to weld up to .25” thick steel.

This welder is current on sale at Amazon through this link here.

This welder is also great in that it includes the gas regulator, meaning that the buyer can use either flux cored wire or mig weld further increasing the flexibility of the welder for the user. The Handler 140 features 4 output voltage settings allowing the user to tune the welder to the material being welded preventing burning and excessive weld clean up.

Let’s take a look at some of the other features of the welder:

  • Handles mild steel or stainless steel, flux cored and aluminum wires
  • Comes ready to use out the box
  • Features 4 output voltage settings
  • Operates from 115-volt standard household current
  • Includes a built-in contactor to make wire electrically “cold” when not welding

If you want to know more about this scope, you can see it on Amazon through this link.

The good

  • Comes ready to mig weld, no additional purchases required
  • Customizable to user’s needs
  • Great for a beginner welder just starting to learn

The bad

  • If you’re primarily looking to weld .25” steel or thicker you might want to look at the Hobart Handler 187 here

This welder is great for:

  1. People that are purchasing their first welder
  2. People that need a welder to do light to medium duty jobs
  3. People that need a welder and need the flexibility of being able to use with most standard outlets

Look below to see a review from a current owner of the Hobart 140 welder:

Hiller,

I was initially drawn to the welder based on the hundreds of positive reviews for it on Northern Tool’s website. After I ordered it and unpacked it at my house I was welding in under half an hour. Even with it being my first time welding ever I was making good welds after 3-4 attempts. Since then I have welded .5” steel with it with 2 passes with success. I am very satisfied with my purchase and I would recommend this welder for farm or home use.

#welding
thinksquad

Overview And History Of Welders

Welding is an age-old practice that was used during the Bronze and Iron ages. However, the technique used then was referred to as forge welding. While arc welding made its debut at a much later date, it has long since been used and perfected. With this comes various options that one must research when deciding to compare welders.

  A clear understanding of what the welder is intended to be used for will create the foundation one will build upon when choosing a welder. In addition, choosing the best welder for your situation depends upon the location of the welding job, the experience of the welder, the type of metal that will be joined, and the quality of the weld expected as well as the amount of money that will be spent.

  In this site we will go into the various types of welders available, their uses, components, and we will even compare each one to other welder types. Below is an overview of welders, some history, and average costs to get the ball rolling on your research.

#welding