rtknives@hotmail.co.uk

4

Another Thor’s Hammer .

This stylized Mjolnir amulet was made up from weighty 4.5mm thick bronze cut from a recycled jet engine part from an RAF plane its been etched in ferric and then stonewashed and shown on 3 strand braided sinew thong .

Available now .

Custom knives , sheaths and gear from rtknives@hotmail.com

4

Custom Victorinox Spartan.

I am a firm believer that to make kit work for you, you should custom it to your needs. This goes to everything from zip - pulls, torches, your pack and yes your knife.

Also everyone likes something unique for them, it’s nice to know you have a one off product.

I have had Victorinox knives since being a boy and there is no denying that they are great. However I came to find that the red scales that come supplied do not offer much grip once wet or muddy.

So I sent my knife down to Ru at rtknives@hotmail.com and after a few talks about what would work best we came up with this rather slick design. It’s black g10 that has been hand textured to give a good grip, whilst keeping a low profile design.

I have EDC this item for well over a year now and could not imagine not having it with me. Ru did a fantastic job as always, and I have seen him carry this design process over to other knives and projects.

Very happy with it.

3

Boker Plus War Toad ‘Pimped’
This came back today from RT Knives
I will not go into detail as Ru has this very well covered in these two posts:

http://ru-titley-knives.tumblr.com/post/103655587101/boker-plus-war-toad-currently-in-the-shop-for

http://ru-titley-knives.tumblr.com/post/103982873996/pimped-war-toad-following-on-from-this-thread

What I will say is that Ru has done an awesome job of pimping this weird/ugly/strange knife and I’m really happy with the outcome.

First two pix above are stolen from Ru and stitched together to show before/after. Third pic I just shot from my cameraphone of the awesome jimped backspacer :-)

For  Custom made knives, sheaths and tactical products check out his page: http://ru-titley-knives.tumblr.com/

 

3

Copper Opinel no10 tanto .

 Another non locking Higonokami style rustic opinel pimp for a US customer with full stonewashed finish with added blue GITD in the one piece copper handle  .

 Custom knives , sheaths and gear from rtknives@hotmail.com

6

Stag Beetle revisited .

Following on from this thread http://ru-titley-knives.tumblr.com/post/68260197849/the-long-jaw-stag-beetle-knife-i-was-inspired back in Nov 2013 I was asked by a good customer and collector of my work if I would agree to sell on my Stag Beetle .

 Based on a long jawed  beetle from Indonesia its made up from etched old high carbon saw blade steel with double layered copper glad G-10 computer board scales to make up the head thorax and abdomen with hand made mosaic pins for the eye .

It recently traveled to its new home in the US with a rustic leather pocket slip and a wood / copper and rare earth magnet desk stand that allows the knife to be positioned in multiple poses.

 Custom knives , sheaths and gear from rtknives@hotmail.com

4

Desert fox kydex mask with shock cord and cord -lock retention for a Gransfor’s Bruks Wildlife hatchet .

if you require a kydex mask for a GB sfa , wildlife or belt hatchet please email me at the address below .

Custom knives , sheaths and gear from rtknives@hotmail.com

4

Bronze laminate Mjolnir.

Another interpretation of Thor’s legendary hammer for a customer down under . This version is laminate San -mai type sintered oilite bronze with a steel core originally from a industrial breaking system .

The material is the same as Ive used in kiridashi knives before and this was etched and stonewashed and is shown with a 3 strand braided sinew lanyard .

 Custom knives , sheaths and gear from rtknives@hotmail.com

3

Enzo Damascus .

Enzo  scandi grind necker I recently put together for a customer in Singapore . The damascus mix is 01 tool steel and I believe 1095 . Scales are desert Ironwood over copper clad G-10 liners with brass hardware .

 Enzo kit via brisa http://brisa.fi/necker-70-dama-sc-kit-desert-ironwood.html

3

Another EOD .

A new version of my EOD Tanto for a customer in Germany .

This one is 5mm thick L3 bearing steel etched and stonewashed with black peel ply G-10 scales over double copper clad G-10 liners with chain ring bolts .

 The customer had seen my original version here http://ru-titley-knives.tumblr.com/post/103483708771/eod-tanto-escape-or-die-trying-85-inchs

 Custom knives , sheaths and gear from rtknives@hotmail.com

5

Kryptek Highlander kydex via @knifekits made up for my stonewashed  6mm 01 tool steel EOD camo tanto .

Sheath can be horizontal / vertical belt carry via tek lok or MOLLE via  molle lok hardware.

 Available now only to over 18′s, please contact at the email below  .

Custom knives , sheaths and gear from rtknives@hotmail.com

5

Cyflect .

A recent request from a customer for his Sig mags based on an idea http://ru-titley-knives.tumblr.com/post/73877632667/cyalume-cyflect-glows-well-in-low-light-and here in 2014.

The cyflect both glints under red or white/ blue  light and glows green in both low and no light settings if charged via either lumens or UV light .

 cyflect available via @lumisafeltd

 tacos via @highspeedgear

Custom knives , sheaths and gear from rtknives@hotmail.com

3

OD green kydex neck sheath for a customers Scandi grind Enzo damascus necker that I scaled up in Desert iron wood and brass hardware which will also fit a tek- lock for belt carry .

 Custom knives , sheaths and gear from rtknives@hotmail.com

4

Wharnie sheathed .

Wet formed veg- tan leather , distressed double dyed and stonewashed sheath with hammered copper saddlery rivets for my wenge wood handled wharncliffe.

 Available now to over 18′s only , please contact at the email below .

Custom knives , sheaths and gear from rtknives@hotmail.com

3

Pimped @coldsteelknives trail hawk with fire-steel mod and kydex axe mask kindly sent to me by the good folks @heinniehaynes to pimp up and test .

 Custom knives , sheaths and gear from rtknives@hotmail.com