no butane


Butane burning in a bowl. DON’T try this one at home. As butane is heavier than air, it sits in the base of the bowl when sprayed from a can, ready to be ignited!
#science #fire #butane #experiment #demo #explosion #beautiful #flames (at Royal Institution of Great Britain)

Made with Instagram

restingbitchfaceisnotsadface  asked:

"I can start with how I went to marine science camp as a kid and end with that time I accidentally brought a flamethrower into the county courthouse" --- PLEASE EXPLAIN IM SO CONFUSED D:

So, when I was a kid, my parents worked full time, so during the summer, my sister and I were enrolled in day-camp so we’d be adequately tired when we got home, and my FAVORITE  camp was Marine Science Camp, run by MSI on the banks of redwood creek, right off the San Francisco bay.  It was AWESOME: we got to dissect squid, there was a literal shark tank, which we got to fish leopard sharks out of and Tag Them For Scientific Research, ad we’d go out on the boat once a week and do things like haul a net full of fish out, use a scoop to study benthic creatures and look at plankton under a microscope.  I realize now we were essentially doing transects, dissections and other field/lab work for a bunch of grad students but it was FUN.  

I totally wanted to be a marine biologist when I grew up and would tell anyone who asked me what I was into about nematocyts and oceanic acidification until The Adult realized their mistake and fled.

At the same time, I was pursing an aggressive interest in the visual arts, which my parents heavily encouraged, becuase they are excellent parents and because it;s was a QUIET hobby unlikely to result in bodily harm, unlike my sister, who got into karate and Theater, which is a surprising dangerous combination.

But then i got to college and realized an issue with this plan: I, hands down, SUCK at chemistry.  I did okay in into becuase I’m great at taking standardized tests, and the teacher got suspended halfway through the semester for getting into a fistfight with another prof for poaching his grad student, but Organic Chemistry was a disaster.  I’ve never been good at arithmetic, and balancing chemical equations is something i need the dang molecule models for. So marine bio was a No-Go.

So I switched my major over to Art, which turned out to be kind of a disaster (the school managed to lose an entire semester of my grades because the Art Department kept really sloppy records and i ended up dropping out and resuming college elsewhere) and AMAZING, becuase I took a human figure drawing course with professor [REDACTED] who announced on the third day of class:  “SWEET THE FOOLS JUST GAVE ME TENURE.  CAN’T FIRE ME NOW, SO LEMME SHOW YOU HOW TO MAKE A FLAMETHROWER”

The thing she actually taught us was how to modify a culinary butane torch to empty the canister at a much higher rate than any manufacturer anywhere recommends, which gives you and AWESOME bigass jet of blue flame, but only lasts about 30 seconds per container.  She also showed us how to make bandeliers so we could carry multiple containers, “just in case”.

In more practical lessons, we were in class when the first gov’t shutdown happened, so we didn’t have money for models, so she oped to bring in various animals for us to draw instead.  there was the usual cats and dogs, but also chickens, horses, a farm hog, a 12-foot Burmese Python and a baby deer that had been abandoned on her porch.  It was really fun, both becuase animals are amazing, and becuase they don’t hold still, so you learn to draw REAL FAST, which is a skill that’s served me well since.

A few years later, I was summoned for Jury Duty, and had to show up at the courthouse for selection.  HOWEVER, I’d put my usual bag in the wash the previous night, so I grabbed my old school backpack to take with me because I knew I had a sketchbook in there to amuse myself with.

I forgot I also had my flamethrower in there.

I live in a pretty low-crime area, so the metal detectors are actually pretty far into the building- you don’t get scanned until you’re actually going into the courtroom.  So for about three hours beforehand, I was sitting in the hallway having a Nice Chat with one of the state park rangers and the CEO of the local call center.  We get called in, and as we walk through, my backpack sets off the alarm.

“Fuck.” I say abruptly remembering what would have set it off.

“Do you have anything metal in your backpack?” the security guy asks me.  I think he was expecting me to say glasses.

“I forgot that I have my flamethrower in here. I’ll just leave this outside.”  I explain, hoping I’m not about to be arrested.

“Please open your bag or leave it outs- your WHAT?”  Dude stops halfway through his routine.

“Flamethrower.  I made it in art class and will definitely be leaving it here.” I say, carefully putting my bag on the table, zipper open , and pointing at the small butane torch.  The guard looks at it, looks at me (pls note, I am small, white, feminine and conventionally attractive so YOU BET privilege was happening here), before deciding that Art People Are Dumb and waving me in after wanding me to make sure I hadn’t accidentally brought anything else in my pockets.

I was not selected for jury duty.

In other news, I still have it, and it still works.  I use it for mass-toasting creme brulee.

—The Ultimate Guide to Marijuana Extracts

Been browsing GreenRush menus and getting confused by all the talk about hash, BHO, crumble, tinctures and waxes? In this post we take a detailed look at the different kinds of marijuana extracts currently available on the market and what makes them unique.

So whether you’re already a fan of cannabis concentrates or you’re a newbie looking to find out what all the hype is about, read on to find out all you need to know. And remember, sign up to GreenRush today and get cannabis delivered from the best dispensaries in your area in minutes.

•What are Marijuana Extracts?

The term “marijuana extracts” basically refers to any product that is made by extracting desirable compounds (such as cannabinoids and terpenes) from the cannabis plant and combining them in a concentrated form.

In cannabis, the compounds manufacturers are looking to extract are cannabinoids (such as THC, CBD, CBN, etc) and terpenes (such as pinene, limonene, etc). Cannabinoids are unique compounds that give cannabis its medicinal properties, while terpenes are mainly known for giving cannabis the aromas and tastes that we all treasure, although they also have medicinal properties of their own.

By extracting and concentrating these compounds, manufacturers are all striving towards one common goal; to create a pure product with high concentrations of the chemicals that give cannabis its distinct effects.

The process of extracting and concentrating these compounds, however, isn’t easy. The purity and quality of the end product is governed by countless variables, including everything from the chemical profile of the strain and the particular extraction method being used.

•It’s All About The Trichomes

All marijuana extracts are made by separating the trichomes (those sticky, hair-like crystals on your buds) from the plant matter. These trichomes contain the highest concentration of cannabinoids and terpenes in the cannabis plant, meaning they also harness the plant’s maximum medicinal potential.

Many plants have trichomes, such as The Venus Fly Trap, which uses them to sense prey on the inside of it’s leaves, or the tomato plant, which uses them to sense predators, such as caterpillars.

Scientists hypothesize that the trichomes found on cannabis work similarly, as a defense mechanism.

•Different Forms of Cannabis Extraction

There are a variety of ways to extract cannabinoids and terpenes from the cannabis plant. The various methods are usually categorized by whether or not they use a solvent to separate the trichomes from the plant matter:

-Solventless Extraction Methods:

Different Forms of Cannabis Extraction

There are a variety of ways to extract cannabinoids and terpenes from the cannabis plant. The various methods are usually categorized by whether or not they use a solvent to separate the trichomes from the plant matter:

Solventless Extraction Methods:

Although the term “solventless” technically refers to a concentrate that is made using an extraction method that doesn’t rely on any kind of solvent, the term is generally used by the industry to refer to products that are made without the use of chemical solvents such as butane or alcohol.

The most common solventless extraction methods include:

Dry sifting: Literally sifting cannabis flowers through various sieves to separate the trichomes from the flower. Dry ice is often used to produce kief or hash.
Cold water extraction: Cannabis plant matter is combined with ice and water and then agitated to separate the trichomes from the plant. The mixture is then filtered to remove the water and leave behind a relatively pure concentration of cannabinoids and terpenes. This method is used to produce ice-water hash.
Heat and pressure extraction: Most commonly used to make rosin, this method uses heat and pressure to press cannabis flowers and extract a thick, golden oil that contains high concentrations of cannabinoids and terpenes. This method is used to create rosin.
CO2 extraction: A complex extraction method that works by turning CO2 gas into a supercritical liquid and using that liquid as a solvent to extract the desired compounds from cannabis plant material. This method is used to create CO2 Oil.

•Solvent-based Extraction Methods

Technically, the term “solvent-based extract/extraction” refers to any product which is made using a solvent, in which case any marijuana extracts made using CO2 or water extraction methods would fall under this heading.

However, the cannabis industry generally uses this term to refer to cannabis extracts made using chemical solvents such as butane and ethanol. The most common solvent-based extraction methods include:

Butane extraction: As the name implies, this method uses butane as a solvent to extract the key cannabinoids and terpenes from plant material. This is usually done by packing cannabis plant matter into a container with a small opening and ‘blasting’ or pouring liquid butane over the flower to extract the good stuff from the plant. The resulting mixture is then heated to remove as much of the solvent as possible, resulting in a concentrate that is rich in cannabinoids and terpenes. This method is used to create a type of hash oil known as BHO (Butane Hash/Honey Oil) which is often referred to by names like Shatter, Crumble or Wax, depending on the consistency and appearance of the final product.
Alcohol extraction: This method is similar to butane extraction, but uses alcohol (most commonly isopropyl alcohol or ethanol) as the solvent to extract the key compounds from the plant. Most commonly, plant material is soaked in alcohol for short amounts of time, before the mixture is filtered and occasionally heated in order to remove as much of the solvent as possible. This method is used to create tinctures and hash oil, the latter of which may be sold under a variety of names describing the texture of the oil or the alcohol it was made with.

•Types of Marijuana Extracts

There are a variety of cannabis concentrates currently available on the market. Here’s a simple guide to help you understand the differences between them:

-Kief and Hash

Kief is the oldest form of cannabis extract and is the main ingredient used to make hash. Using a dry sifting technique, frozen flower is sifted through fine mesh screens to separate the trichomes from the plant matter. The end product is a fine powder with a high concentration of cannabinoids and terpenes.

Regular flower, for example, tends to reach a maximum THC concentration of 25-30%, while good quality kief can reach up to 60%.

Kief is often heated and compressed into big blocks, popularly known as hash. The color of the kief or hash will often speak for its purity; a high-quality concentrate is usually golden, while lower quality products will have a greenish tinge, which indicates that it is contaminated with more plant matter.

-Ice Water Hash

Ice water hash is, you guessed it, a type of hash. The term refers to hash that is made using a ice-water extraction method.

Frozen cannabis trimmings are combined with cold water and ice and agitated (either shaken or stirred) in order to separate the brittle trichomes from the plant matter. The mixture is then sifted through various fine sieves and dried to form a granular concentrated that can be pressed or molded by hand.


Rosin is a cannabis concentrate made using a heat and pressure extraction method which can be easily done at home. Cannabis flower is placed inside parchment paper and pressed between two hot sheets of metal (such as the panels of a hair straightener) to release a sticky, golden oil that’s very similar to shatter.

-CO2 Oil

CO2 oil is the end product of CO2 extraction, or supercritical fluid extraction. This method, relying on complex and very expensive equipment allows for one of the purest extractions of cannabis compounds currently available on the market. CO2 oil is a beautiful amber/gold color and is jam-packed full of cannabinoids and terpenes.

The oil is mixed with food grade propylene glycol or glycerin to keep it liquid at room temperature and is most commonly vaporized in vape pens, although it can also be frozen and dabbed using a regular dab rig.

-Hash Oil

Hash oil is arguably the most popular marijuana extract currently on the market and is most commonly made using the butane extraction method we described earlier.

Hash oil is available in various consistencies which are determined by minute factors in how the cannabinoids and terpenes were extracted from the plant.

Here are some of the most common types of hash oil and how they differ from one another:


Shatter refers to hash oil that has a similar texture to glass and commonly shatters when it is dropped or manipulated. It is clear and usually amber or golden in color and can have a potency of up to 80% THC. Due to its transparency, many mistake shatter as being the purest type of cannabis concentrates.

However, shatter simply owes its transparency to the fact that it’s molecules have been left undisturbed and not agitated like the molecules in wax, crumble, or bubble hash.

During the manufacturing process, shatter is purged of butane by heating it (often under a vacuum) until the butane evaporates. Because the product isn’t agitated, it’s molecules are undisturbed, making for a transparent concentrate.

The consistency of hash oil is governed by factors such as the heat it was exposed to during manufacturing, whether it has been decarboxylated, and it’s terpene contents. Here are some different names applied to concentrates like shatter but with different consistencies:

Pull-and-snap: A concentrate similar to shatter but with a more taffy-like consistency which can be pulled, manipulated, and snapped apart, unlike glass-like shatter.
Sap: A runnier, sticky concentrate that resembles tree sap or honey. This stuff usually can’t be manipulated by hand and you’ll need some kind of tool to load it into a dab rig without making a mess.


Cannabis wax has a sticky texture which, much like shatter, can differ in consistency. The most obvious difference between shatter and wax is that wax isn’t transparent. Instead, it can have a creamy white color, similar to honey when it solidifies.

Wax is opaque because, unlike shatter, its molecules have been agitated. While shatter is just heated during the purging process, waxes are usually whipped. The agitation from the whipping is what creates this non-transparent concentrate.

Like shatter, wax is available in a variety of consistencies which are referred to by various names. These include:

Crumble: A concentrate with a slightly granular texture that can be pressed or molded by hand. As it’s name suggests, it has a similar texture to the topping on an apple crumble dessert.
Honeycomb: Honeycomb waxes are usually hard and very brittle, much like the honeycomb centres in some snack bars.
Budder: Budder has a very rich, creamy, and soft texture similar to peanut butter.


Tinctures are marijuana extracts made by soaking cannabis trimmings in alcohol. The finished product is a potent extract which is usually applied in drops and administered orally. According to Leafly, tinctures were the most common form of medical cannabis prior to prohibition in 1937.


1000 DEGREE KNIFE vs BACARDI 151 🔥🔥🔥
3 oz. (90ml) White Rum
3 oz. (90ml) Mango Rum
3 oz. (90ml) Banana Rum
3 oz. (90ml) Coconut Rum
3 oz. (90ml) Spiced Rum
2 ½ Cups Passionfruit Juice
2 oz. (60ml) Grenadine
2 oz. (60ml) Bacardi 151 Rum
Banana Slices
Strawberry Slices
Orange Slices
Pineapple Slices
Brown Sugar
Butane Torches

Made with Instagram
Guide to Smoking Meth-WITH TORCH LIGHTER

Originally posted by meditateandhallucinate

Why A Torch Lighter Is Ideal:-Your product liquifies, then smokes, almost instantly
-It is MUCH easier to control the direction the meth flows, as well as what is receiving heat
-You can get MUCH bigger hits
-You can avoid burning it so much easier than with other flames
-No flickering flame
-Butane refills are cheap as fucking shit (I got a hairspray-sized bottle of Zippo butane for the price of 2 disposable lighters)
-Don’t burn your thumb as much
-Sessions can be initiated and/or finished faster

Downsides-If you don’t pay attention, you can burn the shit out of your product, or yourself. BE CAREFUL, PAY ATTENTION, AND BE PATIENT
-Smoke through your stash quicker
-Possibly worse burns because its hotter than a bic

How to smoke meth with torch lighter for beginners:
1)First ensure that your pipe is clean.

For the ice to smoke properly. DO NOT load fresh product in a pipe with product that has been smoked, burned, or otherwise heated. If you load fresh on top of a still smokable bowl, the new and old will melt/smoke at different speeds/temperatures (can’t remember which is which right now, but I think old smokes faster), ensuing that it is very difficult to evenly heat the product. Then you get spots where part of the crystalized mass liquifies and will move with the flame, but some of it needs more heat, and for me at least, some always gets burned or darkened, and has a bad taste. If you load fresh product in a pipe with burnt shit in there, IT WILL TASTE LIKE SHIT. It will often also not melt/smoke right, AND your new stuff will taste like burnt stuff, which is THE WORST taste in the world (IM0). (FYI-I’ve heard that blowing cigarette smoke through a oil pipe (like you were going to hit it, but exhaling smoke through it instead) removes the taste. I have tried with pot smoke and it didn’t work, but have read many people say that cigarettes work.

How to Clean the Inside of A Pipe-If it is not clean, a very easy method is to fill a microwavable container (like a coffee mug) with 50% water, 50% bleach, and put the pipe (bowl facing downwards) in the water.
-Put it in the microwave for 4 minutes (yes, seriously that long-I tried after 1, 2, and 3 minutes and it didn’t work. May even take 5.)
-Let cool. Once cooled, remove from mug and drain all water.
-Using Q-tips, insert through carb hole and “mop up” the stuff left in the bowl. This may take several qtips depending on the bowl. If there is still black/brown stuff in the bowl, apply more pressure
(be careful not to break the bowl by pressing the q tip too hard on the sphere, OR accidentally pressing on the side of the carb when trying to reach around inside with q tip.) If there is still stuff in there, I have read that small bits of Magic Eraser stuffed in, and manipulated with a pole (like a q tip) work wonders, but also have not tried.

How to Clean the Outside of a PiPE
-Using a wet rag, or balled-up wet paper towels/toilet paper/napkins/etc, rub the outside of the bowl. This should cause the stuff on the outside to transfer onto the paper.
-If this doesn’t work, steel wool may work.

Handling/Prepping Product

-Dont handle meth by hand. It’s bad for your skin, and little amounts will dissolve. Instead, use:
Ideally: a 7/11 straw (this is a straw whose last inch or so is a scoop, sometimes used for slurpees or w/e those frozen drinks are; these straws I have found to be ideal for handling all sorts of drugs).
Realistically: Normal Straw: Straw been sealed on one end (tape, seal it with flame), and on the other has a 45 degree angle (45 degree is diagonal; if you cut a square in half diagonally, the diagonal line is 45). This allows you to scoop small fragments out of a bag, tin, or other carrying device easily, as the angled mouth scoops up crumbs, especially in corners of bags; while the sealed back prevents any from accidentally spilling.

-Make sure your product is all of the same consistency. I find it best to use one crystal, preferably large (but not to large). I find the size of a tic tac, or slightly larger, to be ideal. Also, cubic or rectangular is best possible shape IME. I will often break long, skinny crystals because they dont burn as well as more square ones, and broken into small squares, they will smoke more evenly.
-While you can load bigger crystals with smaller bits/shake, I generally find it is best to load similar sized rocks. That is, load all shake, load two or three crystals of equal size, or put one crystal in there (usually a big one).
-If you need to break a crystal into smaller bits to make equal sized crystals (or to make odd shaped crystal more square), place a sanitary, nonabsorbent material on top of/around the crystal (no dollars bills here, printer paper works great.) and either snap it in two, or push against a surface. If pressing, you can use a finger, debit card, whatever, just slowly apply more pressure so you can crush to consistency of your liking. If you crush it all the way, you have shake(aka powder).

Differences Between Methods
Single Crystal (often large): Crystal will slowly lose mass as it melts, evenly becoming a pool (as long as you thoroughly spread it around the bowl).
Multiple Little Ones: If you evenly heat them: Will slowly melt into each other. Will be left with a very spread-out puddle, possibly multiple spread out ones.
If unevenly heated: There will be areas meth of varying thickness, accompanied by uneven melting and probable darkening/burning,.
Shake: Will liquify very quickly; little bits that haven’t yet been heated may go to weird parts of the bowl when you begin twisting, so you end up with tiny blotches and a single large or a few smaller puddles.

Loading Product
-Using straw, scoop your product into the chamber. Keeping upright, grab oil pipe and tilt at an angle so that the carb is pointing sideways, or angled down slightly. This will allow you to insert straw opening into carb before tipping the straw, ensuring you don’t miss the hole and lose any.
-Once inserted, twist pipe (while holding onto straw of course) until carb is once again pointing up. Tap straw to get all the little bits into the pipe (if meth is still sticking, use a scraper of some kind).

Now that you have a loaded pipe, ensure that you are ready to begin. Suggestions include
(lots of it!!) Both meth and smoking dehydrate you, and the more dehydrated you are, the more you will suffer from dental damage and brain damage (neurotoxicity). A large amount of methamphetamine neurotoxicity (and most dopamine toxicity) is temperature-dependent, as it often induces hyperthermia (This is similar to MDMA, aka XTC, Molly, rolls, etc). Water cools your body.
You should be urinating with irritating frequency, and should be voiding clear urine, otherwise you are already dehydrated (unless taking assloads of vitamins or something).
I can’t even describe how much music enhances the experience of smoking meth. It synergizes well-the meth makes the music sound insane, and in turn the music intensifies the high, making me feel even more intelligent/strong/attractive/cool/special. This is the part of the high I crave, and it rarely occurs (at least with the intensity I like) without music.
-Spare lighter/butane refill
When smoking meth, you are always running out of fuel. The spare lighter is also useful because lighters get really hot when ignited for long periods of time (like when smoking meth) and you can swap them out.
-Wet (but not sopping) rag or bundled tissues/paper towels/toilet paper/etc
This is to set the pipe on when not using it (a hot pipe will burn fabrics, fucking up whatever its on as well as the pipe), and to cool down the pipe after a hit. The pipe stays hot for a while, and if you don’t hit it, drugs are being lost/wasted. If you cool the pipe, it will stop heating the drugs faster (duh). Do not do this immediately after getting the pipe really hot-heat and cold on glass can break it. Wait for it to cool slightly, then use it.
When you use the rag to cool underneath liquified dope, it will emit a lot of smoke while crystalizing I read somewhere that the meth actually vaporizes/produces smoke when it hits cooler surface, but I don’t know the validity of that. I do know that cold makes it smoke more though.
-Salt Water
Swishing and gargling salt water while smoking meth (ie after a hit, and definitely after a session) will help prevent canker sores, help kill bacteria (which will inhibit meth mouth) clear mucus in back of throat (which will build up from smoking ice, and may possibly absorb some of it), and prevent sore throat. Its really easy-just add table salt to water (not too much). Some people say to use hot water, but there is more bacteria in hot water pipes, so I use cold.
-Biotene Products
These are oral healthcare products designed to combat dry mouth. There is an oral gel that you kind of spread in your mouth and coats it to act like a artificial saliva. It tastes kinda bad (not awful) and feels weird, but it beats dry/cracking skin, and is good for oral health. They also make alcohol-free (alcohol makes dry mouth worse) mouthwash that I find makes me produce a bnch of saliva for like 10-30 minutes, which can be helpful. They have toothpaste, but that is only to not irritate dry mouth. Finally, they have oral mouthspray, which is apparently the best, but I have not tried yet.
Weed makes meth smoking more fun I find. Its hard to describe. Go slow as you may have negative anxiety reaction


The pipe will need to be twisted back and forth, so for me, I hold it in the middle of the stem between my middle finger and thumb. This allows me to easily roll the pipe back and forth. The carb is facing the sky/ceiling, and I have the pipe slanted, so the bowl is slightly closer to the floor than the mouthpiece. This allows me to put my index finger over the mouthpiece. so that when I first heat up the bowl all the initial smoke (that you will not yet inhale because it is not super thick and you want to build up a good hit) goes up the stem and is trapped by my finger rather than out through the little carb hole (which it will do when the stem is filled with smoke). Finally, it also allows me to use my pinky to cover the carb (I rarely do this because often the carb is hot).


[Torch] Lighter is held in the other hand, underneath the dope in the bowl. Adjust your flame to lowest setting (if you can). While initially hitting the bowl, since your mouth is not on the mouthpiece, you can hold the pipe in front of you while you heat to gaug distance between flame and bowl, and make sure the flame is under the drugs. However, once you begin inhaling, you have a much worse view (through the bowl), and it is easy to hold the lighter too close (or far, but usually close), or to have it not even under the bowl. Due to poor depth perception (which I assume is from the drugs), or some visual warping from the curvature of the glass, its really easy to do this, and happens a lot. A mirror is helpful so you can see yourself. Another option is attaching flexible tubing (like aquarium tubing) to the mouthpiece so you can inhale through that while holding the pipe in front of you. This will also enable you to make meth bongs (search it).

Philosophy of Smoking Meth
Meth becomes a clear liquid when heated, then vaporizes into a white smoke. The idea is to heat whatever you placei n the pipe evenly so that it all melts down to liquid, then, by twisting the pipe, spread the liquid all around the bowl, so that it doesn’t stay in a hot place for too long and burn. Once liquified, the pipe can be twisted. This allows you to put your flame ahead of the liquid (think of the liquid chasing the flame), so that once the glass is heated, it will fall/roll down the curve towards your lighter and smoke. As you get close carb, you begin to twist the other way, keeping the liquid following your flame. However, with a torch lighter, you can soon twist the pipe without the flame and the liquid will still run for a while, and when it doesn’t is when you reapply the flame.

Quick Info On Torch Lighters
Torch lighters are very hot, much hotter than bics. Their flame is much more intense, and the heat above is much hotter than a bic. Therefore, you must keep much more distance between your lighter and pipe than with a bic. It will vary according to lighter type, pipe thickness, and especially flame size; but my flame is maybe between 1/3 and ½ of an inch, and my lighter stays 1-3 inches away from the pipe; with me increasing distance the longer its lit.
-Also, you do not heat the bowl with a torch lighter for long periods of time like you do a bic. Once it begins to smoke, quit using the lighter, and only reapply once the liquid quits moving when you twist the pipe. Also, be sure to twist pipe while lighting the whole time with a torch lighter, even if it is slowly. You cannot really get away with heating in one spot for a short period of time like you can with a bic.


-Keeping your flame 1-2 inches below the bowl, roll flame in a circle around the perimeter of your product, so the outermost portion begins to liquify. Remember to continue moving the flame.
-As it begins to liquify, begin twisting the pipe back and forth. You want to heat the edges of the product and then the glass adjacent to the edges to make it flow there. However, when reversing the direction of the twist, make sure to heat the inside/middle for a moment as well so that it will melt once the dope bordering it has melted.
-Eventually you will have a puddle of liquid that is mobile-stop heating! COntinue to twist the pipe to spread the stuff around and wait for it to recrystalize (turn back into a liquid). You can speed this up by touching pipe with damp rag/paper towels/etc, but I like to let it cool by itself the first time. Wait for the pipe to cool down-its worth it.

(this is assuming you are covering the mouthpiece and have the pipe angled like I mentioned in positioning)
-Now you should have a thin puddle of clear crystals stuff. Once again, heat with flame around the perimeter (much bigger this time, but it will also melt faster now because its thinner). Once melted, it should soon begin to smoke. Cease lighting once it begins smoking a fair bit and continue to twist.
-Because you have your finger over the mouthpiece and the pipe angled, the hot vapor will travel up the stem, and be trapped. Once vapor begins to emerge out of the carb hole, quickly take your finger off the stem and begin inhaling (do this quick because the stem is filled with vapor).
To Inhale:
You do not need to actually suck most of the time. With the pipe angled, simply forming a seal on the mouthpiece is usually enough, and if you have to inhale, do not suck like smoking. Instead, inhale like you are breathing but VERY slowly/softly. It takes very little pressure and the bigger hit you get, the better IMO.
Use the torch for very brief periods of time. Once the liquid is moving and smoking agian, stop. You can also use more, but never use less once its burned.
Finishing your hit:
If your lungs are full and it is still smoking, cover the carb and mouthpiece and continue twisting. I like to hold my hits for 4-8 seconds, some say blow out right away, but I dont like that. You can also use a damp rag or damp paper towels/toilet paper/napkins/etc and wipe the bowl, to cool it down and make the liquid recrystalize faster (dont do this when the bowl is still super hot because it can break it). This will make it smoke a lot for a second so I like to do it while inhaling.

For Experienced Users:I have found the torch lighter to be far superior to the bic. With the bic, I would experience uneven and slow heating/melting. Now, I have almost instantaneous liquification, followed by thick smoke, and as long as I use the torch sparingly, no darkening of product. The trick is to be patient and methodical:
-Use the torch 1-3 inches away from the bowl
-Move it quickly
-“Encourage” the liquid to trael all over the bowl by leading it with the flame
-Use inward swirling movements, especially during the melting phase
-I recommend using single, squareish crystals for this.


So my Mom bought me a bong for Christmas…. and it rips 😍💖

anonymous asked:

So apparently there is a sport called fire hockey which is played at night where in the puck is a roll of toilet paper wrapped in chicken wire soaked in kerosene and lit on fire. If you use good toilet paper it burns for about 10 minutes. This is the PERFECT sport for Mick.

Len squints at the scene before him in morbid curiosity.

“Is that–”

“On fire? Yep.” Lisa is completely deadpan.


She points and he follows her finger through to - ah. Mick. That makes sense. He’s standing in the goal post at the end of the cul-de-sac. 

“How long has it been going?”

She shrugs and crosses her arms, leaning against the power company box that marks the end of the lane. “About an hour? He rounded up a bunch of the boys from Ells street playing street hockey and dragged them over here where there’s less traffic. Guess he got bored of you taking forever.”

“I was making plans.”

“Don’t tell it to me.”

It’s then that Mick seems to finally notice them and waves. His eye was fixed on the fireball that was their puck before that, but it appears to have burnt out finally. His stick is a little singed but so is everything Mick owns. Though he doesn’t normally play hockey, let alone street hockey, so Len doubts it’s his stick. Probably a donation from one of the neighbor boys, all of which are closer to Lisa’s age than his and Mick’s.

“Hey Lisa!” Mick calls, waving, “toss us another?”

Len’s ready to roll his eyes. “We’ve got shit to do, Mick!” he calls back, hands cupped around his mouth.

“One more round! It’s fast!”

Mick’s grin is wide and Lisa grabs a – is that toilet paper? She lobs it in Mick’s direction and he’s quick to catch it.

“You gotta be kidding me.”

She’s smiling now. “No clue where he got the idea but I gotta say, Lenny – your friends are creative.”

He nods, bemused, and watches Mick wrap it up and douse it in what can only be one of the many flammable fluids he likes? Butane? Kerosene? Either way, the layers must keep it burning. Len can see how it works, the appeal, at least for Mick.

Now if only the jerk would stop stealing what’s clearly his home’s toilet paper and go to an actual hockey game with Len instead of complaining about the cold.

“One more round,” he says more to himself than anyone else and leans opposite his little sister.