homestuck diy

I need blogs to follow !!!

Hey guys !! I am looking for some friends / new blogs to follow !!!!

Reblog this post if you post/reblog any of the following…

🔼Broadway Musical Content (Be More Chill, Dear Evan Hansen, Hamitlon, Rent, all that good stuff)

🔼 aesthetics of any kind

🔼kawaii things

🔼pastel thing

🔼 marvel / DC 

🔼 witch / wicca stuff

🔼 memes

🔼 poems/poetry

🔼 Kpop things


🔼 Zelda things

🔼 Tim Burton Content

🔼 Adventure Time / Steven Universe / All that good stuff

🔼 Anime things

🔼 guitar / music stuff


🔼  funny text posts

🔼 anything that seems up my alley !!!

I will follow back most everyone who reblogs and maybe send you a PM because I wanna get to know people and all that good shit

Thanks guys !!!

Hello Everyone! 

For this weeks DIY, I went with something who want flowers in their home but can’t deal with the constant upkeep. By attaching these tissue flowers to twigs you get a beautiful fake plant. 

Simply get tissue paper, a few ties and some string in order to create these super easy decorations.

Enjoy, Robin x


Ayyy so I dont follow nearly enough blogs:

If you are one of the following blogs reblog or note this!

-Panic! At the disco

-The Pack

-Team Crafted (I cri erry time)


-Gay ships (lmao)


-Attack On Titan



-Dan and Phil

-Tyler Oakley

-Cute DIY’s

-My Chemical Romance

-Fall Out Boy

- Dangan Ronpa

- Cosplay

- Textpost

- SuperNatural

-Doctor Who

- Hobbit/Lord Of The Rings

-Legend of Zelda

-Death Note



-Pastel stuff

-Cute smol animals



-Future Diary

-Steven Universe



I prolly missed some oops

AquarianValentine’s Glorious Troll Horn Fabrication Guide

so hey i could get  all fancy with a ridiculous and self aggrandizing intro, but frankly its already pretty late and this will take long enough as it is. Basically most ways to make troll horns either don’t turn out good enough, are way too expensive, or are the plush monstrosities at the what pumpkin store. So using whatever i could find lying around the house, i crafted a pair of amporas i used for cosplaying, and i must say they came out better than expected. The rest of this post will be explaining how you can make a pair yourself. So you’re welcome

Step One: Materials

You’ll require 

1 Wire coat hangar, the more malleable the better

1 roll of aluminum foil, you want use all of it, dont worry

an unspecified amount of regular glue, not a lot, as well as access to some water and a washable cup 

1 paintbrush, doesnt have to be fancy

Several sheets of colored tissue paper, in the horn colors. Alternatively you could use plain white paper and then just paint/marker the colors on instead, which would certainly work; however this requires fewer steps. 

i mean this is pretty cheap stuff, right? none of that weird polymer clay stuff, which is bound to cost you

optional: i would suggest finding a hammer or pair of pliers, it makes bending the wire a lot easier, it will save you a lot of pain in your fingers. but maybe dont take my advice. what is art without suffering after all?

Step 2: basic head shape

this is for the basic shape that the head band part will take, pretty much regardless of whatever troll you are doing. A pair of full on Nitrams might require some more support, but idfc, its your problem for cosplayin a lowwblood like them, not mine. anyways

first youll need to bend out the wire, untwisting the top hook, and into this basket shape. its your starting point, and it should be pretty easy

then, youll need to bend the bottom piece of wire into this headband shape, making sure to keep the remaining spans of wire perpendicular to the plane created by the loop. doesnt have to be perfect, but it helps for later on.

now bend the two ends back onto themselves, so that they are parallel with the headband, but not touching! if you were to put it on your head, you should lightly feel it curving over the top of your head with the small horseshoes on both sides sitting directly BEHIND your ears (the Do Not loop under your ears, if they get snagged i would place my bets on the horns over your ear skin), and the end pieces hovering over your temples. now if you have a smaller head than i do, which is likely you poor poor saps, youll probably need to bend the wire a bit higher on the headband piece, making it so theres less of the headband and more of the end pieces. this will help it fit better, and not rub against your ears unpleasantly. if you scroll down a bit there is a picture of how it rests on my head, and roughly how it should on yours. 

now, you need to bend the end pieces towards each other, which translates to bending them into your temples. not uncomfortably, but enough so you can feel them.

Here you can see ive bent the endpieces out again, about where you want the base of the horns to sit. i prefer the idea that the horns sit just behind the temples, but you have the capability to make it as you please.

this is the start of a more tricky maneuver, but its rather vital for the horns stability. i call it the lock bend. first you need to straighten out the very end of the wire, without bending the work youve done so far. then, youll put the indent pictured into it. its important that its shaped like this, with the spiral at the end still in line with the main portion of it. 

now, bend that key like segment back onto itself, so its parallel with the main section of wire. its okay if they are touching now, its supposed to be rather compact.

not pictured: removing that hook by repeatedly bending it back and forth in the place where i wanted it to break. yeah basically do what you just did to the other side, they dont have to visually match, as long as a pattern is present on both sides. you are probably wondering AV, that was complex and painful, why did you make me do it? to which i respond i am but a humble space player, your thoughtless actions are on your own head bud. however, there is intent to my rambling. i hope. but it is called a lock bend because when the tinfoil is wrapped around it, it stops it from moving about, thus locking the horns in place. 

and thats what it should look like so far! that is also the end of the basic shape, everything from now on will be based on what specific pair i am making.

but before we move on

this is roughly where they sit on my head. eventually the front will be moved up a bit, but its close enough. 

IMPORTANT, DO NOT SKIP   for how it should feel to your head, you should only be able to really feel it in four places, where the horseshoes touch your head behind your ear, and where the base of the horns will be on your temple. thats it! the headband should be hardly noticeable. also, the places that touvh your head should have a firm presence there, but they should NOT hurt. dont worry, the whole thing is so light they dont need to be tight, and they will still stay on all day. Seriously, these things hold so well i went to a rave with them on and they held just fine. only thing they cant handle is headbanging. i was a little disappointed at that, but oh well. anyways, if your horns are too loose, just bend them in at the the four places, the temples and behind the ears on both sides. but they should not get so tight as to immediately cause discomfort. after a whole day of con going they can get a bit uncomfortable, but just moving them a bit fixes that.

Part 3: Magnificent Maryams

who i think would appreciate some pleasant alliteration every once and a while. specifically i am doing Porrim’s, so they will be slightly bigger than kanaya’s.

here, rip a sheet of aluminum foil off the roll, about the length that you think you will need for the height of the horns. dont fret over this part, its very malleable.

put the edge of the tinfoil between the lock bend and the main piece of wire, and proceed to start wrapping foil around the wire. you will want to compact it down to the wire as much as you can, this is the base of the horn, and will be used to determine the length.

look at how big that is, and straight! it wouldnt do at all for our darling porrim. so i bent that one (also, remember kids, images in the mirror are flipped, so for non symmetrical horns make sure you have the right side where its supposed to be, because i almost didnt) and pushed down and bent the wire itself a bit, to give it the slow graceful curve i was looking for.

see? much better! now all it needs is a few more layers of tinfoil 

dont those babies look swell? make sure to have them be thicker at the base, and i would compact them at the top so they are stronger. and although you cant see it in this picture, the very bottoms of them are flat and at an angle so they are flush with my skull, which looks very nice. if youve gotten this far, you aught congratulate yourself, for you are very courageous! and dont worry, its almost over.

Part 4: applying the colors

now it seems i erred and did not take any pictures of this process. oh well, its all rather self explanatory. first mix a bit of glue and water together in the container, it doesnt really matter concentration wise, just get your finger tips wet and if they are a bit sticky you are good. 

then, take the paint brush, dip it in the slimy solution, and paint a bit of it onto the horns, and put a little piece of the colored tissue paper onto the horns. obviously, make sure the colors go where they are supposed to, there should be no tinfoil left when you are done, actually eeach color should have several layers. since my yellow was a bit too pale for my tastes, i put a layer of the orange underneath it, and that worked for me, but you might not need to do this. 

a couple hours later, and they are all dry! they are ready to go to your convention now, or maybe just around the house. idk, do whatever you want with them.Good job! you made it to the end of this large and rather incoherent crafts guide on how to make an aliens horns. this whole post took as long as actually making the horns, so around 2.5 hours. i am so tired right now. its 4 am. id be more than happy to answer any questions you may have in the comments. heres a picture of me wearing them

thanks for reading and hopefully learning something, and if you like them please reblog for visibility, thank you kindly,


Hey guys i am looking for more people to follow to see more content on my dash!
Please reblog and/or like if you reblog any of these:

- Love Live!

- Rick and Morty

- South Park

- Horoscopes (especially if you are a libra)

- Homestuck

- Darkstalkers

- pokemon

- Steven Universe

- DC comics

- Marvel

- anything cute

- DIYs

- Drawing tips

- Mystery Skulls

- Noragami

- Cats


- Game Grumps

- Jontron

Day 20/20. Welcome to 20 days of DIY! As a new years resolution to myself I have decided to post daily DIYs. Each day I will post a new DIY idea for you guys to try out! I have really enjoyed doing these, if you want me to do more please let me know!

1. Punch holes in tin foil sheet

2. Line an empty mason jar with tin foil 

3. Place a small light or tea light in the jar

4. Seal mason jar, turn off the lights and watch the stars in your room!

Enjoy, Robin! x


So I actually finished this a few weeks ago, but I’m just now getting to post this. I had bought one of the DIY Pop! vinyl figures from Hot Topic and decided to make it into my favorite villain. I used paint (the black acrylic is so beautiful and shiny), yarn (I pulled it apart to get the size I wanted), and model magic for the horns.

Mintuna Captor Helmet Tutorial

What you will need-

  • A Bike Helmet/Skateboard helmet
  • Foam (If you don’t have foam you could use paper mache or model magic)
  • Pre made Sollux/Mituna Horns
  • Yellow paint
  • Blue/Red markers or red and blue transparent plastic

I’m gonna use this as a help guide!

First, get your helmet and shape it like Mituna’s helmet using Styrofoam, foam,Model magic or what ever you are using.

Ruffle what it should look like- (I cut out the face cus I don’t want to upset the posing person) I would advise if you have got a helmet with a visor on it, that you try to de-screw the visor for a future step.

If you want to, you can pad the whole helmet out. (It does make it look better.) You can add the horns (DON’T GLUE DOWN) just to see where you want to add them. You can achieve the round circles on the side of Mituna’s helmet out of Styrofoam balls cut in half. You can make the middle stripe out of foam or model magic if you have any for making troll horns. It is also a good idea to pad out the inside of the helmet and paint it black, to make it look more realistic and comfortable. 

If you find that the helmet is shaking a lot on your head, then cut out a small hole, the shape of the top of your head, inside at the very top of the helmet to stop it from shaking. (This can be done if you don’t have straps on your helmet, or do not want them on.)

Once that is done you can paint it! (The picture below shows someone who has cut out a hole to stop the helmet from shaking.)

If you want  to spray paint the helmet, then that could work also.

Now you can glue down the Horns!

Now it’s the visor time! If you have a visor already on the helmet then it should be detached by now. Draw a diagonal line across the visor with a pencil, try to get it in the middle.Once the two sides are separated by a pencil mark, grab your markers and colour the opposite sides in blue and red.

If you are using plexiglass do the same as mentioned or if you are using coloured plastic you need to shape it on a line bender if it doesn’t bend, if it can bend then cut and file the sides to be diagonal and so they can fit into each other, you can glue the visor to the helmet front. And if you have a screw on visor, re-screw it on.

NOW YOU SHOULD BE DONE! Happy cosplaying! ^-^

Tutorial by- cosplay-apocalyspe 

I need more blogs to follow!

If your blog has:
*The vampire Diaries
* Beauty and The beast
*Teen wolf
*The L word
*sense 8
* Orange is the new black
*Elfin lied
*Madoka Magica
*Anime in general
Then please reblog or like and I’ll give your blog a look. Thanks!!!


I FINISHED IT YOU GUYS. I LOVE IT SO MUCH. #homestuck #homestuckdress #diy #homemade

Made with Instagram
Dead Dash Again


  • Supernatural
  • Doctor Who
  • Homestuck
  • Grimm
  • DIY’s of anything
  • High Fashion
  • Body Paint/Body Art
  • Makeup! (Costuming or Beauty) This is a BIG ONE!
  • Costuming!
  • Character Development help (be it writing or art)
  • Nerdy stuff (like D&D related or Magic)
  • Anything Anime related
  • Teen Wolf
  • Marvel
  • Anything Video Game related
  • Or anything Let’s Play Related (Markiplier mostly please)

or are a fandom blog in general, and I will follow you!


Vriska is finally complete!!! Tried so hard to make glasses but they didn’t work out very well..
Picture on left is my attempt to simulate cobweb. A little fail, but I thought it contrasted well with the pins. :D Plus, it’s soft and fluffy and nice to lie on.
If it wasn’t obvious, I drew glasses and her smile in the other photo. She looks more complete imo. :3

Dash is Dead

So I want more people to follow! Reblog if you post/reblog:

  • homestuck
  • equara, eriara, arasol
  • supernatural
  • dr who
  • dexter
  • avengers 
  • anything marvel how about that?
  • same with DC
  • jojos bizarre adventure
  • legend of zelda
  • bioshock (all of them)
  • d&d stuff
  • cosplay!
  • diy crafts!
  • magic the gathering

That is all I can think of at the moment for now! i will update it later if i think of anymore!