it hit me after I answered. If you want to have a “girly” Female Icons/Super heros. (hermione granger included!) or if you have time, get paint stir sticks from a hardware store or walmart, and write their names pretty…then hold a program for further decoration??? maybe?
materials used (you may use alternatives which will be listed in brackets next to the materials i used)
1. wire about 3 mm thick ( a metal/plastic ring will suffice this is used for the circle to create the dream catcher)
2. wire cutters
3. multi-colored hemp (string/ yarn/ leather)
4. beads (optional but i love them!)
6. hot glue gun ( preferably low temp)
7. glue gun pad (optional but helps a lot)
plug in glue gun
Take your wire ( if you got pre-formed rings skip this step) form them into circles about 4 in in diameter. you can use circle shaped house-hold objects to assist just wrap the wire around the object. allow the wire to overlap about an inch. ( see the 1st picture) use wire cutters to snip as you craft along.
after all the rings are formed use the hot glue gun to glue them shut applying glue to the inner part of the overlapped wire. (see 1st picture)
begin to wrap your choice of colored hemp around your rings. apply a dollop of glue where you begin to wrap and hold the hemp in place un-till it is stable (this may hurt a little) don’t use a really long piece of hemp because it will make wrapping hard guesstimate the amount needed and it your run out no sweat just glue it still then add on another piece!. (see 2nd picture for wrapping)
now that your ring is all wrapped up use a different colored hemp to fill in the center. use the same wrapping technique from the above procedure but do only 3 revolutions for the center filling process. start at any point then choose another point on the ring in a diagonal or straight position and wrap 3 times…ect. it may end up looking similar to a star if your into that go ahead but if not try making shorter sections and play around with your pattern. add beeds on periodically as you make your pattern. (when done it should look similar to picture 3) glue the end of your hemp to keep it from unraveling
when you have a filled in circle choose what you want to be the bottom of your dream catcher.loop 2 pieces of hemp about the same size onto a point about 2 in from each other centering the bottom. ( picture 4) tie a knot in both pieces.(picture 5 ) then use any weaving pattern you like(braiding, twists fishtail, ect) but leave about 6 in of hemp hanging (picture 6) when done with both sides it should look like picture 7.
choose a combination of feathers for the dream catcher. apply hot glue to the stems of the feathers to connect the feathers alone! let glue dry!
now apply a dollop of glue to the outside and wrap 1 piece of hemp from the danglers around the stem while its still hot. apply pressure while its cooling.
repeat on other side
add beads to the dangling strings (optional) when done it should look like picture 8
hairspray dream catcher for extra hold!
and your finished product should be great!
i hope its as fun as it was when i made them!!! i hope this is a good tutorial i didn’t use one when i made them i winged it and this is my best explanation hope its enough to get you through if you have any questions don’t be afraid to ask ill be glad to help!!!
For those that may have no clue what they’re looking at, this is the iconic hill from the Nightmare Before Christmas, Tim Burton movie. The font is even from Nightmare too!
These took a little extra time. I found the blank moon scene off Google, and then photoshopped the residents’ names in the moon using the Nightmare font! After that process, I had to print each individual scene, cut it out, and glue it to the construction paper.
The font was a free download from dafont.com. It’s called “Buton’s Nightmare”.
It is a fairly easy door dec to make, it just takes time!
What are you all doing for your October door decs? Reblog and let me know! :D