I want to teach you all how I make my fabric poppets, and how you can make your own too. Here is my post detailing all of what I do to make my adorable plush fabric poppets.
I also sell them if making them yourself is too much fuss for any reason. Here are details.
- Fabric of your choice- My fabric of choice is fleece. The fabric should be a color you can match with your intent, personality, etc.
- Person-shaped pattern to trace- You can use a gingerbread man cookie cutter to make your paper pattern, free hand, or if you like you can use mine which I will gladly sell you a copy of- message me for details.
- Needle and thread- You can use different thread colors for different intentions.
- Stuffing and any extras- herbs, objects, etc.
- A marker of a similar but darker color than the fabric
Lay out your fabric. Lay down the poppet pattern on the fabric. I prefer to weight them down with rocks so they don’t shift. (You can of course choose rocks that match your intent.)
I then trace the patter with a maker that is of a similar color to the fabric, but off enough that I can see it. Don’t worry about being super clean with your lines because they will be hidden in the inside seams.
Next, to sew the pieces together. Place them together so that the side with the marker line faces out.
Then, grab your needle and thread. Thread your needle.
Be sure to have a piece of thread to work with that is about as long as your arm. This should be enough for the whole poppet, but make sure to have more on hand just in case.
Start your sewing in the place where the opening will end later. I typically choose the “armpit” of the poppet because then the opening gives me great access to all of its insides for later.
I use a kind of slip stitch for sewing. Really any stitch will do, but I will show you mine. I put the needle all the way through both pieces of fabric to make a loop, and before tightening I stick the needle through the loop, then tighten. This makes a kind of knot that is durable and nice looking. Here’s a picture:
Aside- Why I hand sew- I find the process of hand sewing to be not only relaxing but also more magical. I can focus on my intentions while I sew, and with each stitch I’m fastening my energy into it. This is by no means the only way you can sew them together, but it is my personal preferred way.
Continue sewing around to join the two pieces of fabric. **Remember to leave a 1.5in opening! Also leave your thread attached!** This is the only way to turn it inside out and hide the seams.
- Step 4-
Turn it inside-out. Reach inside and grab the top of the poppet’s head and pull it through the hole like shown. You may need to poke around a bit to make sure everything is fully turned right-side-out.
-Step 5- Once right-side-out, your poppet is ready for stuffing. Start with the appendages first, that way you can make sure they are well-fluffed. After that, if you want add in balls of stuffing in the places of major organs to make it more human. (A ball for a brain, a ball for a stomach, that kind of thing)
If you like, add in herbs or objects for your intent, or keys to link the poppet with the person that you’re targeting. Consider positions of the objects and herbs inside the poppet and the significance. I added rose petals in the head and heart of this one, and mint and rosemary in the stomach. That gives it some symbolism, and what witch doesn’t enjoy symbolism?
-Step 6- When it is stuffed to satisfaction, sew up the opening with the same stitch we sewed with before flipping it. This leaves a rough edge, and I actually like it that way. It makes it easier to cut open the stitching if you ever wanted to for any reason. I can’t be the only person that’s wanted to rip someone’s stuffing out (there’s a curse idea) so I hope you find it useful too.
Do a couple more stitches to assure your thread isn’t going anywhere and then cut it off.
Ta-da! A perfect poppet for all of your witchcraft needs.
Whose iconic symbol is this?! 😉 tutorial on YouTube NerdEcrafter or direct link in my bio. https://youtu.be/T6E-NX6Vya8
#polymerclayjewelry #polymerclaycharms #polymerclay #clay #resin #resina #resinart #resincraft #resincharms #jacksepticeye #youtube #tutorial #eyeball #glowinthedark #eyes #miniature #mini #craft #diy
My dear husband gave me some pretty white-pinkish roses for Valentines Day and as they were starting to wilt I figured it would be a waste to just throw them out. So why not dry them! My usual method of drying involved bundling the flowers and hang them upside down over a radiator. I used to do this quite a lot when I was a teenager but I have lost the patience to do so (Also I don’t have a suitable radiator in my current house anymore)
I looked around for a faster method and stumbled upon a few options:
Option 1: Place petals on a flat surface in a warm environment with lots of ventilation and leave for a loooooong time. No. Not an option if you have a hyperactive 4 year old running around and destroying everything in his path.
Option 2: Dry them using an oven. Place rose petals on an oventray and put them in the oven on 200 degrees while leaving the oven door open. Still takes too long for me so I found another method:
Option 3: Nuke the fuckers. The microwave, Now let me tell you, I was a bit skeptic about this. I mean, rose petals in the microwave? I don’t know man. But hey, they said on the internet that it would take only a minute. Not too bad,so I tried it.
I placed the petals on a plate covered in kitchen paper, making sure that the petals were not touching each other. I place the plate in the microwave and blasted them for a minute an a half. They were not completely dry yet so I nuked them for another minute. The came out perfectly dry. You want them to be crunchy, like potato chips, if they are still bendy, there’s still some moisture left in them.
After they’re nuked till crispy I placed them on a baking tray to dry for another 48 hours before storing them in an airtight container (I placed the tray on top of a closet and out of sight from my dear little monster child)
^ This is the result of me being an impatient little shit. I put the 2nd batch of petals in the microwave for a full 3,5 minutes because, hey, maybe it’s faster than
checking on them
every 30 seconds… Burnt the everloving fuck out of the poor things. So be patient.
Tah-daah. Finished. The pot I used is a glass airtight pot that used to hold instant coffee. The only reason I drink instant coffee is because of the pretty pots like this one, I’m building up quite a collection of them. They’re very useful to store various stuff in
Anyway, I hope this was useful! I’ll make a new post about what to do with them once I figure it out myself :)
A while back i found a tutorial but i cant find it, but i remember how to do it, so in result i made my own to help all of my transmasculine brothers who can’t afford packers, aren’t out to everyone, or can’t buy a packer for any other reason! You’re all so strong for getting through each and every day and i hope this makes your daily lives better!! I love you all!!!
Materials: Five(5) socks of the same size, three(3) rubber bands/hair ties, one(1) or two(2) safety pins(i used one(1))
Step 1: Fold three(3) socks together, either from the inner sock or an outer one, so that there are two(2) inside of one(1).
Step 2: take the other two socks and fold them into mostly spherical shapes.
Step 3: put one of the balled up socks into the other.
Step 4: put the two balled up socks into the other group of socks, just before where the two inside socks are.
Step 5: put a rubber band towards the tip, another one between where the balled up socks are and the folded ones, and one between the edge and the balled up socks.
Step 6: fold the edge over so that it shapes the balled up socks some more and put the safety pin on top of that.
Step 7: use the safety pin to attach the packer to the inside or outside of your underwear(inside if youre using traditionally mens underwear, outside if you use traditionally female underwear. I’d also suggest putting another pair of underwear or compression shorts/leggings over it if you pin it outside to keep it in place better.)
And you’re done!! Good luck, and be safe my dudes!!
I used an old frame box to make packaging accent cards. All you do is cut, cut , cut, decorate ( i used our handmade stamps) and then stick into a package for a little extra aesthetic handmade perk <3 Nice thing is that you can use anything to decorate the pieces and customize the style to your own <3
Growing new succulents from the ones you already have is super easy- simply twist a few leaves off of the mother plant (or use already fallen leaves), let them dry and callous over for a few days to avoid rot then place on soil. Spritz with water every 3 or so days and you’ll see progress like mine above in around 3 months- be patient!