Hanging in my office, is a clone of the rifle I carried on two combat tours(Iraq and Liberia). It’s a reminder of where I came from, where I stand today, where I am going and why I am going there.
While serving in 2nd Force Reconnaissance in the late 1990’s and early 2000’s, my unit started seeing radical advances in small arms and light weaponry via the SOPMOD program. Suddenly, carbines could quickly be fine tuned for specific missions by mounting night vision systems, laser aiming devices, weapon lights and red dot optics to the 1913 Picatinny Rail Systems on the upper receiver and handguard.
These technologies opened up whole new tactics, techniques and procedures that could be employed to prosecute our mission of specialized reconnaissance, ambush and direct action raids.
Despite the additional capabilities the SOPMOD program delivered, opinions were sharply divided on the program. Some saw these tools as a burden, adding a lot of “crap” that would only increase the amount of weight our Marines carried on mission for little tangible benefit. A maxed out M4 could run up to 14 pounds, but we didn’t need every component for every mission.
TWO POUNDS OF METAL
The SOPMOD accessory package that my platoon ended up running included almost two pounds of weight in mounting interfaces alone. When I challenged this, I got a typical Marine Corps answer, “Because that’s what you are issued, now quit asking irrelevant questions Too Speed.” (Too Speed was my call sign)
I couldn’t accept that answer. It was an institutional answer that repeated a party line and the lives of my teammates were, and will always be, more important than not rocking the boat.
After some trial and error, the first mod I made was to ditch the Surefire M951 Weapon Light and replace it with a Surefire 6P in a shotgun tube light mount that I scored at a sporting goods shop near base. After swapping the 6P tail cap for the M951 remote switch assembly, I then ran the tape switch on the left side of the 203 so activating the light wouldn’t impact my weapons manipulation.
Getting a weapon light in tight with a rail and shaving weight off the interface was something I would spend the next 10 years fiddling with before I had a eureka moment and Haley Strategic Partners released the Thorntail Adaptive Series of light mounts, currently in use by military, security contractors and law enforcement worldwide.
This time was a defining moment for me, as it was when I first started tweaking and eventually building original components for my platoon based on the unique requirements of our missions. These experiences of shaving weight, improving ergonomics and finding a balance between capability and utility, would drive the development of so many of the components I have commercialized in my post-service career.
THE RIFLE I TOOK TO WAR
Colt M4 with 14.5” Barrel Colt M203 40 mm Grenade Launcher Knights Armament RAS Handguard PEQ-2 IR Aiming Laser Surefire Classic 6P with a custom “Simply Dynamic” mount Boone & Packer Redi-Mag Simply Dynamic Multi-Mission Sling (commercialized by Magpul as the MS3)
Prior to the invasion of Iraq, Force was trained up for both Green Side(reconnaissance) and Black Side(direct action) missions, with the assumption we would be tasked to one or the other. However, when we entered Iraq, our platoon found ourselves doing a combination of both at the same time. Force Recon is a special operations unit that prepares the battlespace and gathers intelligence for the MAGTF(Marine Air Ground Task Force) and then prosecutes specialized targets as directed.
With a few days under our belts, the entire platoon started striping gear and mags, looking for that perfect balance of speed, utility and capability. If you can’t move, you can’t be effective. Most of the Marines went from 13 rifle magazines to between five or six. I ended up with four on my vest and two taped together on my carbine with riggers tape and offset with a stick.
Force Recon ran low signature loads outs, often working out of vehicles(mil and civilian), and running a double mag on the carbine meant I had 60 rounds at the ready. When I saw the “Redi-Mag” in a copy of Shotgun News, I ordered it and had it delivered to me overseas. Despite the weight, the Redi-Mag was more versatile than the old riggers tape and stick, and cut my carbine reloads to sub one second.
I no longer run a Redi-Mag because there are so many excellent belt mounted magazine pouches available today, that I can reload at almost the exact speed as from a Redi-Mag. That said, you will sometimes find them on my house and car guns, as I do not expect to be kitting up if someone breaks into my house or I find myself engaged with an active shooter around vehicles in the streets.
The M203 is a vital component to small and agile units, like Force, who operate in small units in semi and non-permissive settings. It becomes even more essential in worst case scenarios where the mission is compromised or the unit is outright ambushed by an enemy force.
We prepared for scenarios where 203s could be employed for a hasty breach, in instances where a short count/stack was not possible. Also, as a posturing tool to achieve immediate fire superiority in the face of an ambush. Finally, we practiced employing them to suppress fortified enemy positions in buildings by putting accurate fire through windows or open doors.
In fact, in the first gunfight I was involved in during OIF, I put this into practice, pumping 40mm HEDP(High Explosive Dual Purpose) rounds through windows of enemy positions 50 meters out. This fire created instant hate and discontent on target, where crew served weapons and M4s did not offer as much of an immediate positive effect. We had never trained to fire the M203 at such a close distance for safety reasons, but I held at the top of the window frame with my Aimpoint and the round went straight where I wanted it.
The MEUSOC 1911 has an almost legendary reputation among 1911 and handgun enthusiasts. One of the most high performance handguns ever built, the MEUSOC 1911 we ran was hand built by Marine Armorers from the Precision Weapons Section at MCBQ (Marine Corps Base Quantico). They fine tuned our 1911’s, hand selecting barrels, link pins, sear springs, ejectors, firing pin stops, mainspring housings and mainsprings. Slides were custom built by Springfield Armory with beavertail safeties and recoil spring guides by Ed Brown, Novak rear sights, Wilson Combat extractors + mag release buttons, and King’s Gun Works ambi thumb safeties.
Force ran the 1911 specifically in direct action raid or ambush missions. It was not a primary and would only come into play if our carbines had run dry or malfunctioned. We carried 10 round magazines with 230 Grain 45 ACP. More than enough to deal with any immediate situation and then refocus on the carbine to get it back into action.
On DRP(Deep Reconnaissance Patrol) Missions, I personally chose my Berretta M92, which was our only 9mm alternative at the time. The flatter trajectory at range of the 9mm and the larger magazine meant more bullets to deal with more problems in the event my carbine was down or permanently disabled.
When I later worked as a security contractor on Ambassador Bremmer’s detail with Blackwater, we would run Glock 17s. But in the end, the mission drives the gear. But more importantly, the mission drives the man.
THE MISSION DRIVES THE MAN
When I first started making gear, I was doing it to help keep my guys alive. When I started my first company, Simply Dynamic Tactical, I wasn’t in it to get rich. I was doing it to pass on what I learned in combat and to provide tools that would stack the deck in the favor of the men and women who were going overseas or out on our streets as warfighters, law enforcement or private citizens.
Surviving war is an awesome responsibility. For those who have been in combat, you never forget the brothers you lost. When you are one of those who made it back, you carry a weight that is difficult to put into words. I was lucky to have known such great men in my life. I was lucky to have a second family closer than any people I will ever know.
As I approach the 5th year in business with Haley Strategic Partners, we have tried to bring this industry together and to stay focused on that one mission. Enable brave men and women to complete their missions as safely as possible. Through training, through gear and through mindset.
Why do u think Khan used that disguise (covered his face) during the time in Kronos and why did he just revealed his face before the combat ended...?
It wasn’t necessarily a disguise per se, as much as some protection from the elements + a bit of discretion. He probably was just wearing that for:
1) Some degree of concealment, being able to move around attracting less attention than if it had been as quickly evident from afar that he was a human rather than just some random Klingon (after all, he was carrying a rifle he brought from the Federation, but also a large crew-served weapon which would normally have been mounted on a Klingon ship, which he’d ripped off and was using by himself. So whether he targeted a random patrol or went into an inhabited area in a different province to acquire weapons (in preparation of Marcus following him to hunt him down, which he was certainly expecting), he had to approach Klingons without being immediately spotted, prior to obtaining that weapon.)
At some point he most likely fought some Klingons, and it’s highly likely
he was the reason why they were suddenly having various patrols in the inhabited
zone, something that took the Enterprise crew by surprise.
2) Ketha province is an abandoned wasteland filled with floating debris/ashes in the air/whatever that stuff in the air is. Not something you’d want to be inhaling, augment or not.
He couldn’t afford to come down with an illness or even be fighting at less than optimal condition in case something messed up with his lungs/required him to waste energy healing from it (it was bad enough to be fighting a one-man-war as it was), so covering his airways while running around through such an area made a lot of sense.
Once that was less of a priority because he was mostly done with the fighting/breathing hard bits and needed to go make himself recognized and talk to the Enterprise crew to find out about the torpedoes, he pulled it off.
One word… AMAZING. But the whole time I watch this display of firepower, I wasn’t just thinking how cool it was…. I was imagining what it would be like if I was the one down range receiving all this hate during a firefight. I’m sure a lot of the guys who’ve been in firefights themselves were reminded of their own experiences during this climax to the event. I’m thankful we have the freedoms in this country to put on events like these. And I’m thankful I was able to take the time to come watch, so I can respect crew served weapons and explosions more. Minigun video next. #knobcreek #machinegunshoot #knobcreekshoot #pyro #nfa #class3 #crewserved #supportweapons #generalpurpose
To celebrate battlefield 1 tell me about this bergman mg15 na machine gun
The Bergmann MG15nA Machine Gun
Most machine guns at the turn of the 20th century were large, water-cooled, crew-served weapons, like the Maxim gun or the British Vickers. They were invaluable on the battlefield, as the first few months of World War One proved, but they were also bulky and hard to maneuver in a hurry, especially when troops were on the attack, which was when they most needed the increased firepower that a machine gun can provide. To answer this problem, a number of designers had been working on light machine guns to give attacking troops a lightweight machine gun they could take with them.
One of these new light machine guns was the Bergmann MG15nA. The MG15 was designed by Theodor Bergmann, and like the Maxim gun it used a short-recoil operation, which uses the recoil of the gun to push back the bolt with each shot, expending the used round and chambering another. Originally the MG15 used a water-jacket around the barrel to cool the gun, but soon it was replaced with a perforated, air-cooled jacket, which made the gun lighter. Called the MG15nA, neuer Art (New model) to distinguish it from the older version, the Bergmann machine gun made its appearance on the battlefield in late 1916 after the Battle of the Somme, where German soldiers saw the need for a light machine gun after suffering heavily to British soldiers armed with their own version, the Lewis Gun.
The MG15 saw significant usage on the battlefield, but it was not as prevalent or as reliable as the more common MG08, a light version of the Maxim Gun, and German soldiers preferred the British Lewis Gun to both. The MG15 used an ammunition belt for loading, and fired at a rate of 300 rounds per minute, which tended to overheat the barrel quickly, rarely firing more than 300 rounds. Its range was around 400 meters for accurate fire. Unlike how it is depicted in Battlefield 1, the MG15 still weighed enough, around 33 pounds, that it would be very hard to fire for a single, standing soldier, and it would certainly be impossible to aim. In reality a crew of two or three soldiers would use the gun, with one firing, mounting the gun on its bipod, while the others held the ammo belt and carried extra rounds. The Bergmann MG15 also played a more significant role in the German Imperial Air Service, which mounted it on planes.
The soldier at the far right, kneeling, has a Bergmann MG15nA.
Cpl. Jeff Glod of Waterville, N.Y., a Marine sniper attached to the 24th Marine Expeditionary Unit, takes aim through his scope during a crew serve weapons shoot aboard USS Nassau (LHA 4). Nassau is deployed as part of the Nassau Amphibious Ready Group/24th Marine Expeditionary Unit in support of Maritime Security Operations and Theater Security Operations efforts in the U.S. 5th and 6th Fleet areas of responsibility. The NAS ARG/24 MEU is comprised of embarked Marines from the 24 MEU, the amphibious assault ship USS Nassau, the amphibious transport dock USS Mesa Verde (LPD 19) and the amphibious dock landing ship USS Ashland (LSD 48).