button packs

hey so you know that vicious cycle of mental health making you unproductive which makes your mental health worse? don’t worry friend I am here with something that can help

just get one thing done. break the cycle. it doesn’t have to be some big task. in fact it’s better if it isn’t. decide on something that takes five minutes or less. keep it tiny and manageable - the key is to feel like you’ve accomplished something, so when your brain is all, you can’t even do a single thing all day except lay in bed being useless, you can be like, oh but I did do something, brain, suck on that. it might not seem like much at the time but it helps a lot to have something tangible you can point to

do you have dirty dishes in your bedroom? get rid of ‘em. you don’t have to wash them, just put them in the sink with soapy water. done. easy.

do you have a pile of empty water bottles sitting there? good for you staying hydrated. but you don’t need a mountain of plastic reminders. throw a few in the trash or in recycling. don’t worry about chasing down every single one, just pick a number. get rid of 5 or 10. easy, manageable even if you feel terrible. done.

do you need to do something early tomorrow? get something ready now. just one thing. lay out an outfit. fill the coffee maker so you can just press a button tomorrow. pack your backpack or purse. bonus benefit, future you will have an extra few minutes to breathe in the morning.

do you have a pet? spend 5 minutes with your pet. cuddle them. play tug of war. make baby noises at them. your pet loves you. I bet they miss you when you’re sad. you’ll both feel better.

has it been 3 weeks since you did laundry? pick your clothes up off the floor and put them in a laundry basket. don’t actually wash them or even take the basket anywhere. just collect the clothes for later so they aren’t spread all over. it’ll make actually doing them that much easier when you have more energy

did you manage to wash your clothes but not put them away? fold something. fold another thing. and one more. put them away. three things. you got this one.

did you do your one thing? good. I’m proud of you. even if it didn’t make you feel better, guess what? you did a thing. you got something done, you can be done now. you can go back to bed if you want.

3

NOTEBOOKS PRE-ORDERS OPEN! (3 designs available)

  • $22USD for 1 notebook & 5 buttons + shipping
  • Payment method is via PayPal
  • Notebook size: 5.43 x 8.26 inches (13.8 x 21 cm)
  • 100 blank pages per notebook

*PRE-ORDERS OPEN FOR LIMITED TIME*

Send an email to johannathemadshop@gmail.com telling us your favorite design and get your notebook+buttons pack now!

Anyone know what the deal is with this Sega Saturn controller?

I picked it up in Chinatown and I noticed it has little play, stop, chapter forward, and chapter back icons on some of the buttons.

Was this originally packed with a particular game or one of the other versions of the console?

idontwannabhere  asked:

Sorry if this has been asked already, but - assuming Butts has been to Nuka-World, would he ever wear the Ripped Shirt & Socks outfit from the Pack? Y'know, the one with the cute shorts & stockings. -winkwinknudgenudge-

Despite the existence of this post, Buttons has not been to Nuka World yet. It’s the Bitch’s territory but according to our story, Hauser + Buttons + a whole Minutemen militia will clean up the place eventually.

I doubt Buttons would wear anything pack related. As he would say: “wet dog smell is only pleasant when it comes from an actual wet dog”. And lets be honest, he’s been getting an uncomfortable amount of attention even though he’s been wearing baggy pants and dusters.
However, he would love to see Meg in those stockings. It’s right up his alley!

Scratch - Part 6 - (Steve x Reader)

Originally posted by sincerelysaraahh

Summary: (Y/N) and Steve have been best friends since New York, so when when they are both going through a dry spell they agree to a friends with benefits relationship.

A/N: I just wrote the last part of Scratch and I can’t wait for you all to read it. I still don’t know if I will write an epilogue, but I will give myself a few days off of writing before I decide. Total word count is over 17k. Also I completely procrastinated on writing an essay due today so I kinda have to work on that. I’m half way through BSing my way though it, so wish me luck.

Warnings: light smut I guess ¯\_(ツ)_/¯

Part 1 Part 2 Part 3 Part 4 Part 5

“I got take out,” I call out setting the many boxes filled with food on the counter of the kitchen.

“Did you get pot stickers,” Sam asked taking one of the boxes and opening it.

“Enough to feed an army,” I grin. “Or in our case, the world’s mightiest superheroes.”

“I thought you didn’t like being called a super hero,” Steve said entering the room and taking the box I handed him.

“I’m not a fan of it since I don’t actually have a superpower,” I shrug. “But I’ll still take the compliment.”

“Are there pot stickers,” Nat asked as she walked into the kitchen.

“Nat I am disappointed,” I frown. “You really think I would get take out and not get pot stickers?”

“Just making sure,” she shrugs grabbing one of the boxes from the table.

The rest of the team eventually showed up and grabbed their box and we all sat around the living area eating.

“I still think one of the most memorable missions was the one we had just outside of Vegas,” Sam said as he reached for another pot sticker from the box on the coffee table.

“Was the mission what was memorable, or was it the long weekend we took at Caesar’s palace,” Steve laughed.

“Definitely the long weekend,” I speak up remembering the small vacation we had taken.

“I think we should do it again,” Tony says making everyone’s attention turn to him.

“I agree,” I grin. “When was the last time we took a vacation?”

“The long weekend in Vegas,” Nat says.

“Then it’s settled,” Tony pulls out his phone and tapped a few buttons. “Everyone pack your bags. We leave for Vegas in the morning.”

Keep reading

6

NEW ADDITION TO THE STORE: NOTEBOOKS!!!!

  • $22USD for 1 notebook & 5 buttons + shipping
  • Payment method is via PayPal
  • Notebook size: 5.43 x 8.26 inches (13.8 x 21 cm)
  • 100 blank pages per notebook

*PRE-ORDERS AVAILABLE FOR LIMITED TIME*

Send an email to johannathemadshop@gmail.com telling us your favorite design and get your notebook+buttons pack now!

How to convert CAS objects to Toddler

I was going to do a voice over but I chickened out and got too shy to do it :< sorry about that. anyway, a while ago, a few people messaged me and ask on how to convert it for toddlers, given that there isn’t much stuff for them yet. so I thought I’ll do a quick video on it. (a rather crappy one, i’m sorry, i was in a rush) BUT hopefully it helps. for personal conversion or something. I just want to point out that I’m no expert, I just figure out these stuff a while ago. and if you’re someone new that’s looking to do some cc, i encourage you to! and practice practice practice! <3 it can be a bit addicting lol, for me at least.

OKAY, instructions below. incase the video confused you guys. (or you can just ask me if you need more help)

STEP 1: getting the mesh you want to convert & the texture/specs etc

> mesh
open up your sims4studio click the cas button, search for what you want and go to the mesh tab and export LOD0.

> texture/specs etc
on the texture tab below, you can see that there’s diffuse, shadow, specular, normal etc etc. be sure to check all of it. if it’s empty you don’t have to export it. for my case, I’m doing the round glasses so I will need to export the diffuse & specular section since there’s an image on it. save with a name that you’ll know.

STEP 2: getting the toddler rig

> toddler rig
re-open your sims4studio or cancel the whole thing like i did, select clip pack > animation button then name your file, once done; go to the clips tab and you will see the export, import, rig and a dropdown bar. Click on the dropdown bar and select toddler, export and name it something you can easily identify it as.

STEP 3: appending object to rig in blender

Open your toddler rig on blender. on the top left bar; select file and click append. I’m gonna assume you guys picked the glasses as well, now look for the the child round glasses mesh, click on it and go into the object folder and select s4studio_mesh_1 & s4studio_mesh_2. then link/append to library (shown on top right)

STEP 4: mesh checking and stuff

okay so now you have the child glasses in your blender. as shown on my video, you can see that I’m checking which object belongs to which mesh by toggling on and off at the eyes in the right column section. if you want the round glass part you’ll need to keep it, but since I don’t need it, I just right click and delete it.

Also, I don’t know if anyone else does it, but I usually delete the rig01. click on the little triangle beside s4studio_mesh_1 then go to the tiny wrench section below and set the object to rig as shown on video.

STEP 5: adjusting the object to fit the rig

make sure you’re on edit mode! to check, you can select or look at the bottom part of the screen where it says edit mode. if it’s not, just click and select it.

okay, here’s some shortcuts for you to maneuver your object around.

A key: select/deselect all
R: rotate
G: moving it around
G+Z: moving objects vertically
G+X: moving objects horizontally
G+Y: moving objects back and forth
CTRL+ALT+Q: quad view
S: scaling/sizing objects
S+Z: scaling the object vertically
S+X: scaling the object horizontally (you can press x twice for another type, just try messing around and see which fits your liking)
Mouse>scroll wheel: to rotate the whole thing and view around blender

on the video, you can see me using G+Z to move the selected glasses down to the toddler’s level. (make sure you press the A button before doing the G+Z so the object is selected)

next you can see me using S+Z & S+X to try to scale it down a bit and adjust it around to fit the toddler. G+X and so on are used. basically the stuff on the shortcut section I just typed. once everything is done, click save as, name it and save as blender file.

STEP 6: putting everything together for the toddler

I’ve never typed anything this long for a very long time lol and if you actually read everything till the end, thank you for your time. seriously. anyway, final step.

open up your sims4studio or go back to it. make sure you select “create 3D mesh” then next. since I’m working on the glasses, I’m going to select one of the toddler’s glasses > click okay > name your file. if you’re working on other stuff like hat then I recommend you pick one of the items from the hat catalog. it’s easier that way. 

okay, go to your mesh tab and import your toddler glasses mesh that you just did. make sure you import it to all the LODs. which means all 0, 1, 2 and 3. NEXT, import the texture and specular that we exported earlier from the child version.

done? okay. so you probably see this blue thing on the toddler’s eyes. (remember in blender we deleted it because we don’t need it) so to fix it, go to the warehouse tab, and check on the geometry. zoom in and see which is which, and delete the glasses section (the inner part, NOT the outer rim)

now you can just go back to your mesh tab and like, click it and see if its gone or not. once done. SAVE AND HOLY CRAB I’M DONE TYPING MY HANDS HURT. i don’t have to do a recolor tutorial right?? i’m sure you guys know how.

ANYWAY, THATS IT. ENJOY, HAVE FUN, BLABLABLA QUACKQUACK. Thank you for taking the time to read my long list of instruction LOL. anything else, just ask, I’ll try to help.

NOTE: I forgot to add that you can just delete off the toddler rig package & child glasses package file. we don’t really need it since what we wanted was the meshes (you can see me deleting it somewhere in the video) but if you still want to keep it around then go ahead. ;>

well, now y’all know my name LOL. i forgot to change it <_< >_>

3

New button designs!!

VOLTRON FUSIONS BUTTON PACK FOR $20 (+ shipping)

*ONLY 25 SETS AVAILABLE*

  • Payment method via PayPal
  • Size:  2.16 inches (5.5 cm)
  • Buttons are not sold individually

Send us an email to johannathemadshop@gmail.com to get yours!