Noise-creating aircon units can be very annoying, especially in any other location in a bedroom or home where noise is intolerable. When sleeping, the noisy aircon can pose a major challenge as it sways all night. The same goes for straightaway in a noisy home office. Even without any soundproof aircon, you can easily solve vibration and noise problems encountered with the machine. All of this requires some investigative work and a keen eye for the details of finding defective parts. Here are some helpful tips to make your aircon quieter easier for you. Singaporeans will find these aircon servicing tips particularly useful in times of heat.
1. Determine the source of noise
Vibration is usually the main cause of noise in aircon units. However, the noise that all families wake up at night may also be due to other pitfalls. Before hurrying to buy new equipment, first check to see if the source of the noise can be identified.
The first step you can take before finding a problem is to firmly tighten the unit. Find all visible screws and tighten. In addition to making the unit quieter, this action will also make it safe and secure to use. Loose screws will only cause a lot of rumble and vibration, eventually leading to excessive noise.
3. Check if the device is securely installed
This test can be done by turning on the device and assessing whether the noise is due to poor installation. You can gently press it to hear any noise. If the noise disappears when pressure is applied, it can be shimmed to hold it in place. This will keep your aircon unit quiet.
Blades can also cause unpleasant noise. Therefore, unplug the equipment and check if the aircon's blades are bent. Curved blades apparently cause a lot of noise. Bend it properly so that they align or resemble other blades. Once successfully completed, you can retrieve it and test again.
Some noise can only mean that your unit is experiencing significant problems, especially if there is a sudden noise of beating or clinking. These noises may mean that compressors, fans, or any other major component are about to be abandoned. Continuous noise should not be ignored, but should be dealt with as soon as possible. If the compressor fails, you can replace the compressor and your equipment noise is reduced.
Air conditioning is a smooth device. Therefore, these parts and components are designed to work in compression or in small spaces, which is likely to cause noise. Damaged parts can also cause large amounts of noise due to deterioration. This is the main reason why need to call professionals perform routine maintenance and will reduce your aircon noise.
One of the most suitable techniques for effectively eliminating noise is to always clean it up. In addition to reducing all the annoying noise, clean it to maintain its good condition and extend its useful life. To thoroughly clean the equipment, remove the detachable parts and clean them. Some of the movable parts of the oil will also get rid of the noise, so that the machine can run quietly.
Sonic boom at boot may mean unsuitable catheter size. The sound is usually propelled by the air in the catheter. A duct that is too small or defective will not allow air to flow freely. The only reasonable way to do this is to change the catheter. This will make your aircon quiet.
In some cases, noise from aircon may simply mean that the unit is subject to significant wear and has failed. In such cases, alternatives may be compulsory; therefore, call a Singapore professional if necessary. When the appliance is properly installed and maintained, you can rest assured that your power supply will be quiet for a long time.
