Warn Powerplant HD Dual Force winches

The Warn Powerplant Dual force is basically a winch AND a compressor in one unit.

WINCH AND COMPRESSOR IN ONE COMPACT UNIT
The PowerPlant Dual Force HD is an Ultimate Performance winch and compressor in one compact unit, and it’s perfect for big vehicles. Just flip the activator switch to compressor mode and discover the can-do attitude of the PowerPlant. Powered by a 4.6 hp motor, the PowerPlant HD puts out 5 cfm @ 90 psi, with a built-in air tank and intercooler. That means airing up four 35” tires from 8 psi to 35 psi in 8 minutes-or less. It’s also great for powering air tools such as impact guns and nailers. And with the PowerPlant, there’s no labor-intensive compressor set up: it’s part of our standard winch mounting process.

Switch to winch mode and the PowerPlant turns on the latest in legendary WARN winch technology and performance. You get 12,000 lbs. of raw pulling power from our series wound motor, 80’ of 3/8” diameter wire rope, plus the proven reliability of the 3-stage planetary geartrain and a contactor that’s rugged and reliable. In other words, WARN to the rescue, time after time.

Best in class on-board air, plus the heavy pulling power and long winch duty cycle big trucks require.

So is a Warn PowerPlant for you? Besides looking exceptionally cool and having the ability to not only winch you out of the most problamatic situations, you also have the added bonus of being able to reinflate your tyres should you need to. Afterall one of the most common problems while off-roading is tyre damage and so it’s always advisable to carry some type of air compressor to help you out when the going gets tough, the question is, does it warrant the high price tag?

Well, there’s no doubt of the practicality of the Powerplant. Warn winching quality teamed with a compact compressor within one unit. It will surely take up less space than have a seperate compressor and would be ideal if your particular requirement is using air power tools in remote places. If these are your needsthen the Warn Powerplant Dual Force is for you!

Warn PowerPlant Dual Force HD Specifications:-

POWERPLANT HD SPECS/PART NUMBERPart Number: 71801 (12V)Rated Line Pull: 12,000 lbs. (5440 kgs) single-lineIntended Use/Application: Vehicle Recovery / Tire Inflation and Air Tool Operation.* For Trucks and Heavier SUVsDuty Cycle Rating: 

Motor: Gen ll Series Wound 4.6 hp 12V, with Thermal Protection Shutoff SwitchRemote Control: Remote switch with Thermometric LED and 12’ (3.7m) leadGeartrain: 3-Stage planetaryGear Ratio: 261:1Clutch (freespooling): Sliding ring gearBrake: Integrated direct-drive cone brakeWire Rope: 80’ of 3/8” (24m of 9.5mm diam.)Fairlead: RollerRecommended battery: 650 CCA minimumBattery leads: 2 gauge, 72” (1.83m)Finish: High-gloss black powdercoatDrum Diameter/Length: 2.5”/9.0” (6.4cm/23cm)Weight: 115 lbs (52 kgs)Air Reservoir: 1/2 gallon with Integrated Air IntercoolerHigh Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psiMax Air Pressure: 100 psiAir Pressure Switch: YesAir Hose: 12’ nylon, with quick-disconnect. Brass air fittings and couplings
12V DC PERFORMANCE SPECSLine Pull
Lbs.(Kgs.)Line Speed
FT./min(M/min.)Motor
CurrentPull by layer
layer/Lbs(Kgs.)020.5 (6.25)89 amps1/12,000 (5440)2000 (910)11.7 (3.57)153 amps2/9517 (4317)4000 (1810)8.6 (2.61)207 amps3/7886 (3577)6000 (2720)6.7 (2.04)265 amps4/6732 (3054)8000 (3630)5.4 (1.65)318 amps9500 (4310)4.4 (1.34)370 amps12000 (5440)3.6 (1.10)416 amps
 Above performance specs are based on first layer of drum

Winch Dimensions: 24.31” L. x 6.7” D. x 13.46” H. (617mm L. x 170mm D. x 342mm H.)Mounting Bolt Pattern: Mounting bolt pattern 10.0” x 4.5” (254mm x 114.3mm)

A range of PowerPlant accessories are readily available, including air tank plumbing kit, air compressor accessory kit and ‘hotdog’ air tank.

To buy the WARN PowerPlant HD CLICK HERE *Price promise*