lockset

Wright Products VMT115SN Accents Serenade Mortise Lockset Satin Nickel Wright,Products,VMT115SN,Accents,Serenade,Mortise,Lockset,,Satin,Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset, Satin Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset Satin Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset, Satin Nickel Wright,Products,VMT115SN,Accents,Serenade,Mortise,Lockset,,Satin,Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset Satin Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset, Satin Nickel Wright,Products,VMT115SN,Accents,Serenade,Mortise,Lockset,,Satin,Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset Satin Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset Satin Nickel Wright Products VMT115SN Accents Serenade Mortise Lockset Satin…

Unlocking Corbin Lever-Set

I got a call recently from a locksmith company I am working with to open a door in a doctor’s office. When I got there, I saw that it had a Corbin/Russwin lever-set. The lever was mounted so high on the door that the Keedex K22 lever tool I usually use under the door just barely slid over the lever when the tool was standing straight up.

I tried to pick the lock, but it didn’t seem it will do the trick. Each time I tried to pull the lever down with the tool, it got just about to full travel and the tool slipped off the lever. This happened more than a few times no matter how careful I was. At that moment, I had to just stop and think of another way to do the job.

If only I could keep that tool on the lever for one more inch of travel. I asked the nurse if she had any masking tape. She came up with a roll of gauze pad tape. I wrapped it on the tool on the short part between the long upright and the loop where the wire attaches. I put it on with the sticky side out. The first time I tried it again, the lever opened right up. Next time I know to carry a tape with me, so I won’t get stuck in a similar situation. Check out this following link for other info on locksmith services.

Tow Ready 63201 J-Pin Anti-Rattle Get Now

Tow Ready 63201 J-Pin Anti-Rattle Get Now


Tow Ready 63201 J-Pin Anti-Rattle Pin and Barrel Lockset for 2″ Square Receivers


Ideal for Bake Racks/Hitch Mounted Cargo Carriers. Attachment Wrench Included.

  • Hitch Accessories: J-Pin Anti-Rattle Pin and Barrel Lockset; for 2 inch square receivers

List Price : $47.00
Price : $31.31
Saved Price : $15.69
(2014-10-04 10:11:27 UTC)

Disclaimer Price :
Product prices and availability are accurate…

View On WordPress

When should we replace a brand new door lock?

1.
Locks that are rusted or worn are a serious weakness in residential security. Old, worn out locks are more easy break and to pick, plus they are more difficult to open with a key as time goes on. It may be time to replace your lock if your door lock has serious tarnish, rust, or other visible signs of wear. Service or you must replace the lock instantly to prevent an inconvenient malfunction which could leave you locked out if your lock is growing increasingly difficult to open with the key, particularly on chilly nights.


2. Break-ins
If you have had a break-in or robbery, you must replace your door locks. The force involved with a robbery or break in can undermine the integrity of the mechanisms of the lock. A lock that is damaged will put you at an increased danger of another robbery, and a lock malfunction that may leave you locked out in the cold can be caused by mechanical failures as an effect of the damage.


3. Lost or Stolen Keys
For better security in your home, you must replace or re-key your locks if your keys are lost or stolen. Find out which keys you’ve lost, and replace the locks in order of security precedence. Outside locks which would give an intruder access to your own house should be replaced immediately. Internal locks can be replaced by you in order of your personal security priorities after your outdoor area is ensured.

You might reap the benefits of a combination door lock including the SmartCode, if you frequently lose your keys. By inputting a code mix door locks can be opened,. Most combination locks also have a keyed lock for back-up in case the blend input signal malfunctions, or to acquire entry if the code is lost. The blend should alter whenever you believe its accessibility may have already been endangered, if you’d lost your keys much like you would replace keyed locks.

4.New Roommate
If you rent out space at home, protect yourself by replacing locks or re-key every time renters change. You’ll gain peace of mind knowing your locks are secure and protected, and you will not have to guess your previous renters in the event of a break-in. You can’t be convinced they didn’t make a back-up copy, even if their key was turned in by the last renter. They may not even remember having given a copy of their key to friend or a neighbor in the past.

Taking care of your locksets and hinges


Locksets play a vital function in a home and, if not maintained, can be an unnecessary expense repeated over and over and cost you time and money. However, these issues can easily be avoided with proper maintenance. The steps for maintaining your door locks are easy and quick to do. Lubricate…
House and Home tips and advice! –> Taking care of your locksets and hinges

Automatic keyless entry door locks

Automatic keyless entry door locks

These days, many people want to live comfortably. This has lead to the popularity of gadgets automated technology in the life of contemporary society. Both supporters and opponents agree that technological advances accelerate action or procedure significantly. In light of this, various advances in technology and gadgets have been produced to assist the function of a modern gate. One such gadget…

View On WordPress